Adjusting the oven temperature

Your appliance has been factory calibrated and tested to ensure an accurate baking temperature. For the first few uses, follow your recipe times and temperature recommendations carefully. If you think the oven is cooking too hot or too cool for your recipe times, you can adjust the control so the oven cooks hotter or cooler than the temperature displayed.

The oven temperature my be increased +35°F (+19°C) or decreased -35°F (-19°C) from the factory settings.

Example: increase the oven temperature by 30°F:

Step

Press

1.Press and hold bake for 6 seconds.

2.Enter 30.

3.Press start.

Example: decrease the oven temperature by 30°F:

Step

Press

1.Press and hold bake for 6 seconds.

2.Enter 30.

3.Press self-clean.

4.Press start.

NOTES

Oven temperature adjustments made will not affect the broil or self-cleaning feature temperatures.

If the temperature shows an adjustment of -30°F, and a +30°F adjustment is needed, you can toggle between the (-) or (+) in the display by pressing self clean.

DO NOT USE oven thermometers such as those found in grocery stores to check the temperature settings inside your oven. These oven thermometers may vary as much as 20 to 40 degrees from actual temperatures.

SETTING OVEN CONTROLS

Operating the oven light

The interior oven light will automatically turn ON when the oven door is opened.

Press

to turn the interior oven light ON and OFF

whenever the oven door is closed.

The interior oven light is located at the upper left rear wall of the oven interior and is covered with a glass shield held by a wire holder. The glass shield must be in place whenever the oven is in use.

To change the interior oven light, see "Changing the oven light" in the Care & Cleaning section.

21

Page 21
Image 21
Frigidaire FGGF3056KF important safety instructions Adjusting the oven temperature, Operating the oven light