CARE & CLEANING
Cleaning tips for the Bake-n-Warm™ oven
For easier
CAUTION
Be sure the range is unplugged and all parts are COOL before replacing oven light. Wear a
To remove the
1.Before drawer removal, be sure to turn OFF the Bake-
2.Pull the drawer away from the oven. Using a phillips- head screwdriver remove the 2 drawer screws from the insides of the front oven drawer compartment (Fig. 1).
3.With one hand hold the drawer front in place. Use your other hand to pull the glide away from the oven (See Fig. 2) until the glide hook disengages (See Fig. 3).
4.Repeat from step 3 above for other side of the drawer.
5.With BOTH glide hooks disengaged, carefully lift the drawer up and away from the oven. Push both drawer glides into lower oven cavity.
6.Replace the lower oven light with a 40 Watt appliance light bulb (Refer to Fig.5).
To replace the Bake-n-Warm™ oven drawer:
1.Pull both drawer glides and fully extend outward from lower oven cavity.
2.Carefully rest the drawer on top of both glides.
3.Adjust the drawer position on top of the rails until both of the drawer side slots are correctly engaged with the glide hooks (See Fig. 4).
4.Pull the drawer forward to line up the drawer with both screw holes in glides. Using a
5.Replace drawer rack and close lower oven drawer.
Fig. 2
Glide Hook Disengaged | Glide Hook Engaged |
Fig. 3 | Fig. 4 |
Fig. 5
Fig. 1
28
