OPERATING INSTRUCTIONS
Status Indicator Lights
The console lights provide information about the cycle selection and current status. During operation, while the door is closed, these lights will remain off and will automatically turn on when the door is opened. At the completion of a cycle, the clean light will come on. The sanitization light will also come on if that option was selected and sanitization was achieved during the wash cycle.
In the unlikely event that the dishwasher malfunctions, displays the error code “Uo”, or gives poor performance you can call the Frigidaire Customer Care Center at
Status Window
The STATUS window, available on some models, indicates the following activity:
Number of delay start | |
| hours. The last hour |
| will count down in |
| minutes. |
CD | Close dishwasher |
| door. The status |
| indicator lights will |
| also flash to indicate |
| current cycle status. |
MINUTES | Number of minutes |
| left in cycle |
PF | Appears in window |
| when dishwasher is |
| first connected to Power |
| or when power is |
| restored following an |
| interruption. To clear, |
| select START/CANCEL |
| or close the door. |
Console Lights
If it is desired to have the console remain on while running, perform the following operation: Prior to starting a cycle, press and hold POWER PLUS and RINSE ONLY simultaneously until the corresponding lights begin to flash. This will keep the console lights on during cycle operation. Simply repeat this operation to revert back to the previous setting.
Overlay
6