SETTING MAIN OVEN CONTROLS

ADJUSTING OVEN TEMPERATURE

The temperature in the oven has been pre-set at the factory. When first using the oven, be sure to follow recipe times and temperatures. If you think the oven is cooking too hot or too cool for the temperature you select, you can adjust the actual oven temperature to be more or less than what is displayed. Before adjusting, test a recipe by using a temperature setting that is higher or lower than the recommended temperature. The baking results should help you to decide how much of an adjustment is needed.

NOTE

The oven temperature adjustments made with this feature will not change the Self-Clean cycle temperature or the Broil temperature.

To adjust the oven temperature higher

1.Press BAKE for 6 seconds. “” will appear in the display.

2.To increase the temperature use the number pads to enter the desired change (Example 30°F) 3 0. The temperature may be increased as much as 35°F.

3.Press START to accept the temperature change and the display will return to the time of day. Press CANCEL to reject the change if necessary.

To adjust the oven temperature lower

1.Press BAKE for 6 seconds. “” will appear in the display.

2.To decrease the temperature use the number pads to enter the desired change (Example -30°F) 3 0 and then press SELF CLEAN. The temperature may be decreased as much as 35°F.

3.Press START to accept the temperature change and the display will return to the time of day. Press CANCEL to reject the change if necessary.

TO SET THE OVEN CONTROL BACK TO THE FACTORY DEFAULT SETTINGS

This function allows you to reset the user defined settings back to the original settings. These include 12 or 24 Hour Time of Day Display, Continuous Control Operation or 12 Hour Energy Saving Mode, Silent Control Operation or Normal Sounds, Fahrenheit or Celsius Temperature Display, Oven Temperature Adjustment (set back to 0).

1.Press and hold 7 until the first single beep sounds (about 6 seconds).

2.After the first beep, press START once. All the setting are now set to the original factory default.

OVEN LIGHT

The main oven is equipped with 2 oven lights. The oven lights will turn ON automatically, when the oven door is opened.

The oven light may be turned ON when the door is closed by using the oven light pad located on the control panel. The oven light key will toggle the lights at full intensity.

To toggle the Oven Lights ON and OFF:

1. Press .

The interior oven lights are covered with a glass shield held by a wire holder. The glass shield must be in place whenever the oven is in use.

To change the interior oven lights, see “Changing the oven light” in the Care & Cleaning section.

23

Page 23
Image 23
Frigidaire FPEF4085KF important safety instructions Adjusting Oven Temperature, To adjust the oven temperature higher