Microwave
FPMO209K F Built-In
|
|
|
|
|
|
|
| 30"min.** |
| *Note: When used in combination with |
|
|
|
| |||
| another Frigidaire® |
|
|
|
| |||
| minimum clearance of 2 7/8" required from |
|
|
| ||||
| bottom of |
|
|
| ||||
| edge of companion product’s faceplate, |
|
|
|
| |||
| leaving a 2" visible gap between both |
|
|
| Full plywood | |||
| product faceplates |
|
|
|
|
|
| |
|
|
|
|
|
|
|
| base required to |
|
|
|
|
|
|
|
| support 100 lbs. |
30"or 27" |
| Power cord |
|
|
|
| ||
Trim Kit Faceplate | location (right | 16 3/4"min. |
|
| ||||
| 24 " | top rear) | 17"max. | 24 3/8"min. |
| |||
|
|
|
|
| ||||
|
|
|
|
|
|
| 24 11/16"max. |
|
18" |
| 13 | 3 | /8 " |
|
| 20" |
|
|
| 2" | min. |
| ||||
|
|
|
|
| ||||
|
|
|
| rear |
| (visible |
|
|
|
|
|
| extrusion | gap)* |
|
| |
|
| 19 1/8" |
|
|
|
|
| Trim Kit – |
|
|
|
|
|
|
|
| 7/8" faceplate |
(30") 30" | 1" |
|
|
|
|
|
| overlap |
(27") 27" |
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
| |
Allow at least |
|
|
|
|
|
|
|
|
21" clearance for door |
|
|
|
|
|
|
|
|
depth when open | 120V/60Hz |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| grounded outlet |
|
|
|
|
|
|
|
Bottom Duct Assembly |
|
|
|
|
|
|
| |
|
| 4" | 6" |
|
|
| ||
|
|
| Outlet should NOT |
| ||||
16 3/4"min. |
|
|
|
|
|
| ||
|
|
|
|
| be located within |
| ||
17"max. |
| 4" |
| shaded area UNLESS | ** Minimum cabinet width | |||
|
|
| cabinet depth is | |||||
|
|
| required for installation | |||||
|
|
|
|
|
| greater than 21" | ||
|
|
|
|
|
| with optional 30" Trim Kit. | ||
|
|
|
|
|
|
|
| |
24 3/8"min. |
|
|
|
|
|
| 27" minimum cabinet width | |
| 20" min. |
|
|
| required for installation | |||
24 | 11/16"max. |
|
|
|
|
|
| with optional 27" Trim Kit. |
Microwave Specifications
•Product Shipping Weight (Approx.) – 46 Lbs. (not incl. Trim Kit)
•Voltage Rating – 120V / 60 Hz / 15 or 20 Amps
•Connected Load (kW Rating) @ 120 Volts = 1.7 kW
(For use on adequately wired 120V, dedicated circuit having
•Amps @ 120 Volts = 14.3 Amps
•Always consult local and national electric codes.
•Microwave can stand alone on countertop or be built in with optional 30" or 27" Trim Kit (ordered by individual part number) which includes Bottom Duct Assembly – shipped in separate box.
•Allow 21" minimum clearance for 90° door swing.
•Minimum 20" deep oven cutout dimension is critical for proper installation for oven and faceplate to fit flush against cabinet front.
•Consult local building code, in the event that cutout opening may be required to be enclosed with sides, ceiling and rear partition.
•Full base of solid plywood or similar material required, capable of supporting 100 Lbs.
•Base must be level and front of cabinet square for proper operation.
•Grounded outlet should NOT be located in shaded area, as indicated, UNLESS cabinet depth is greater than 21".
•Can NOT be installed above any gas wall oven.
•
•When used in combination with another Frigidaire®
Note: For planning purposes only. Refer to Product Installation Guide on the web at frigidaire.com for detailed instructions
Optional Accessories
•30" Stainless Steel Trim Kit – (PN # MWTKP30KF).
•27" Stainless Steel Trim Kit – (PN # MWTKP27KF).
FRIGIDAIRE®
USA • 250 Bobby Jones Expressway • Martinez, GA 30907 • | Specifications |
CANADA • 5855 Terry Fox Way • Mississauga, ON L5V 3E4 • | subject to change. |
FPMO209K 05/09 | © 2009 Electrolux Home Products, Inc. | Printed in the U.S.A. |
