Operating Instructions
Operating Instructions
(continued)
TO OPERATE ON FAN ONLY: | YOU WILL SEE: | |||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
DO THIS:
PRESS
MODE BUTTON
CHOOSE
FAN ONLY
Note: Use this function only when cooling is not desired, such as for room air circulation or to exhaust stale air on some models. (Remember to open the vent during this function, but keep it closed during cooling for maximum cooling efficiency.) You can choose any fan speed you prefer. (Except “Auto Fan”).
During this function, the display will show the actual room temperature, not the set temperature as in the cooling mode.
TO USE THE ENERGY SAVER (ECON) FEATURE: | YOU WILL SEE: | |||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
DO THIS:
PRESS
MODE BUTTON CHOOSE ECON
Note: In this mode, the fan will continue to run for 1 minu- te after the compressor shuts off. The fan then cycles on for 20 seconds at 10 minute intervals until the room tempe- rature is above the set temperature, at which time the com- pressor turns back on.
SLEEP FEATURE: |
|
| YOU WILL SEE: | ||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
DO THIS:
PRESS
SLEEP BUTTON
2009 Electrolux Home Products, Inc.
Note: In this mode the selected temperature will increase by 2 °F 30 minutes after the mode is selected. The tempe- rature will then increase by another 2 °F after an additional 30 minutes. This new temperature will be maintained for 7 hours before it returns to the originally selected tempera- ture. This ends the "Sleep" mode and the unit will continue to operate as originally programmed. The "Sleep" mode program can be cancelled at any time during operation by again pressing the "Sleep" button.
All rights reserved. | 7 |
