1. | Unplug refrigerator from wall outlet. | 6. Peel off label covering ice maker hole. | ||||||||||
2. | Remove ice tray rack from freezer (some models). |
|
|
|
|
|
|
|
| |||
3. | Remove freezer shelf (some models) by pushing shelf |
|
|
|
|
|
|
|
| |||
|
|
|
|
|
|
|
| |||||
| to left until right side of shelf is out of hole. Slowly lift |
|
|
|
|
|
|
|
| |||
| up and pull on shelf to remove. |
|
|
|
|
|
|
|
| |||
|
|
|
|
|
|
|
|
| ||||
4. | Remove plugs from inside freezer compartment |
|
|
|
|
|
|
|
| |||
|
|
|
|
|
|
|
| |||||
| with putty knife. |
|
|
|
|
|
|
|
| |||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
7. With needle nose pliers, remove foam from hole.
5. If refrigerator has exterior condenser (C), go to rear of refrigerator and locate left condenser mounting bracket screw(s). Remove and save screws. DO NOT remove compressor sound baffle (A), if installed.Carefully bend condenser out away from back of refrigerator.
If condenser is mounted inside compressor compartment (D), remove screws securing sound baffle to cabinet (B).
8. Push water inlet tube into small hole on back of refrigerator. Rotate while inserting tube until flat surface of inlet tube is tight against back of refrigerator.
3
