Handle installation
CAUTION
Wear gloves and use extreme CAUTION when installing these handles. The rounded end of the handles may be sharp.
IMPORTANT
To ensure proper installation of handles, please review these instructions and illustrations thoroughly prior to installing the handles.
Additionally, before installing the door handles, make sure the door swing is correct. Your model will have either a right hand or left hand door swing. Follow instructions in the Use & Care Guide to reverse the doors, if necessary.
To attach metal refrigerator handle:
1Place rounded part of handle onto shoulder screw on face of door and align the two (2) holes in top of handle with the two (2) holes in top of door. Do not tighten the set screw yet.
2Install the two (2) screws into the top of the handle.
3Tighten the set screw on the rounded part of the handle until the handle is flush with the door, then tighten another 1/2 turn.
To attach metal freezer handle:
1Place rounded part of handle onto shoulder screw on face of door and align the two (2) holes in bottom of handle with the two (2) holes in bottom of door. Do not tighten the set screw yet.
2Install the two (2) screws into the bottom of the handle.
3Tighten the set screw on the rounded part of the handle until the handle is flush with the door, then tighten another 1/2 turn.
Stainless Steel Models
6
