Avoid Service Checklist

Before calling for service, review this list. It may save you time and expense. This list includes common occurrences that are not the result of defective workman-ship or materials in this appliance.

OCCURRENCE	SOLUTION

Air conditioner will not operate.	Wall plug disconnected. Push plug firmly into wall outlet.
	Wall plug disconnected. Push plug firmly into wall outlet.
	Plug Current Device Tripped. Press the RESET button.
	House fuse blown or circuit breaker tripped. Replace fuse with time delay type or reset circuit breaker.
	Control is OFF. Turn Control ON and set to desired setting.

Air from unit does not feel cold enough.

Room temperature below 60°F (16°C). Cooling may not occur until room temperature rises above 60°F (16°C).

Temperature sensing element touching cold coil, located behind air filter. Straighten away from coil.

Reset to a Lower temperature.

Compressor shut-off by changing modes. Wait approximately 3 minutes and listen for compressor to restart when set in the COOL mode.

Air conditioner cooling, but room is too warm - ice forming on cooling coil behind decorative front.

Outdoor temperature below 60°F (18°C). To defrost the coil, set FAN ONLY Mode.

Air filter may be dirty. Clean filter. Refer to Care and Cleaning section. To defrost, set to FAN ONLY Mode.

Temperature is set too Low for night-time cooling. To defrost the coil, set to FAN ONLY Mode. Then, set Tem- perature to a Higher setting.

Air conditioner cooling, but room is too warm - NO ice forming on cooling coil behind decorative front.

Dirty air filter - air restricted. Clean air filter. Refer to Care and Cleaning section.

Temperature is set too High. Set temperature to a Lower setting.

Air directional louvers positioned improperly. Position louvers for better air distribution.

Front of unit is blocked by drapes, blinds, furniture, etc. - restricts air distribution. Clear blockage in front of unit.

Doors, windows, registers, etc. open - cold air escapes. Close doors, windows, registers, etc.

Unit recently turned on in hot room. Allow additional time to remove “stored heat” from walls, ceiling, floor and furniture.

Air conditioner turns on and off rapidly.

Dirty air filter - air restricted. Clean air filter.

Outside temperature extremely hot. Set FAN speed to a faster setting to bring air past cooling coils more frequently.

Noise when unit is cooling.

Air movement sound. This is normal. If too loud, set to a slower FAN setting.

Window vibration - poor installation. Refer to installation instructions or check with installer.

Water dripping INSIDE when unit is cooling.

Improper installation. Tilt air conditioner slightly to the outside to allow water drainage. Refer to installation instructions - check with installer.

Water dripping OUTSIDE when unit is cooling.

Unit removing large quantity of moisture from humid room. This is normal during excessively humid days.

	Remote Sensing Deactivating	Remote control not located within range. Place remote control within 20 feet & 180°, radius of the front of the
	Prematurely (Some Models).
	Prematurely (Some Models).	unit.
		Remote control signal obstructed. Remove obstruction.

	Room Too Cold.	Set temperature too low. Increase set temperature.
		Set temperature too low. Increase set temperature.
		Remote Sensing activated (on some models) and remote control located in Hot Spot - Relocate remote
		control or deactivate remote sensing.

If These Solutions Fail, Call 1-800-444-4944 For Frigidaire Service.

P/N 66121617 specifications

The Frigidaire P/N 66121617 is a high-quality replacement part designed specifically for use in refrigerators and other cooling appliances. As an essential component for maintaining optimal performance, this part exemplifies Frigidaire’s commitment to innovation and reliability.

One of the main features of the Frigidaire P/N 66121617 is its compatibility with a range of refrigerator models. This versatility ensures that users can find a suitable match for their appliances, minimizing the hassle associated with searching for the right component. Additionally, the part is designed to fit seamlessly into existing systems, making installation straightforward for both professional technicians and DIY enthusiasts.

In terms of technology, the Frigidaire P/N 66121617 incorporates advanced materials that provide enhanced durability and resistance to wear and tear. This is particularly important in cooling applications where components are exposed to fluctuating temperatures and moisture. The high-quality construction ensures that the part can withstand daily use over an extended period, offering long-lasting performance.

Another key characteristic of the Frigidaire P/N 66121617 is its energy efficiency. By using this replacement part, users can help improve their appliance’s overall energy consumption, which may lead to lower utilities costs and a reduced environmental impact. Optimizing energy use is vital in today’s world, and Frigidaire’s commitment to sustainability is evident in this product.

Moreover, the Frigidaire P/N 66121617 undergoes rigorous quality testing to ensure it meets or exceeds industry standards. Consumers can trust that they are investing in a reliable and effective replacement part, which can lead to improved appliance performance and extended lifespan.

In summary, the Frigidaire P/N 66121617 is a versatile and dependable replacement part that embodies Frigidaire’s dedication to quality and innovation. With its compatibility across various appliance models, advanced material construction, energy efficiency, and stringent quality control, this part stands out as a top choice for anyone looking to maintain or repair their refrigerator. By selecting the Frigidaire P/N 66121617, users can ensure that their cooling appliances continue to function efficiently and effectively for years to come.

Frigidaire P/N 66121617 warranty Avoid Service Checklist, Occurrence Solution

Models: P/N 66121617