Installing the hood | 11 |
|
•Remove the hood.
•Drive “lower” wood screws, by hand. Remove screws.
•Mount the hood onto the “upper” screws.
•Drive and tighten the “upper” wood screws, by hand.
•Drive and tighten the “lower” wood screws, by hand.
Air deflector installation
(Recirculating accessories)
•Assemble the air deflector with the duct cover bracket with 4 assembly screws provided as shown.
Connecting the ductwork
•Install ductwork, making connections in the direction of airflow as illustrated.
•Push duct over the exhaust outlet.
•Wrap all duct joints and the flange connections with duct tape for an airtight seal.
•Make the same connection in the wall or ceiling vent exit.
Airflow
Duct tape over seam
•Measure from the bottom of the air deflector to the bottom of the hood outlet, as shown.
Dimension to measure |
•Cut the duct at the measured size.
•Uninstall the air deflector removing the 4 assembly screws.
•Slip the duct onto the bottom of the deflector.
•Place the assembled deflector and duct over the exhaust outlet from the hood.
•Assemble the air deflector to the duct cover bracket with 4 assembly screws provided as shown.
