LP Side Burner Conversion
1.Loosen the flex line attached to the side burn- er valve using an adjustable wrench. (See Fig. 1)
2.Remove the flex line completely from the side burner valve. (See Fig. 2)
3.Remove the control knob from the front of the side burner. (See Fig. 3)
4.Remove the screw holding the bezel in place on the side burner and remove bezel from front of side burner. (See Fig. 4)
5.Grasp and remove NG valve assembly from the side burner tube assembly and remove from the side burner. (See Fig. 5)
6.Install LP valve assembly into the side burner. (See Fig. 6)
Underside of right side burner shelf
Fig 1
Flex Line
Valve Assembly
Fig 2
Flex Line
Fig 3
Screw |
| Bezel |
|
|
|
Fig 4
Fig 6 | Fig 5 |
LP valve Assembly
