Check
Filter
Sleep
Temp/Timer
Temp/Timer
Remote
Sensing
Timer
Mode
Fan
Speed
AutoTemp
Med
Hi
Lo
Heat
EnergySaver
Cool
FanOnly
Check
Filter
Sleep
Temp/Timer
Temp/Timer
Remote
Sensing
Timer
Mode
Fan
Speed
AutoTemp
Med
Hi
Lo
Heat
EnergySaver
Cool
FanOnly
Temp/Timer
FanFasterFanSlower
Temp/Timer
Cool Energy
Saver
Fan
Only
Sleep Auto
Temp
Timer
Start Stop
Remote
Sensing
Check
Filter
Sleep
Temp/Timer
Temp/Timer
Remote
Sensing
Timer
Mode
Fan
Speed
AutoTemp
Med
Hi
Lo
Heat
EnergySaver
Cool
FanOnly
Check
Filter
Sleep
Temp/Timer
Temp/Timer
Remote
Sensing
Timer
Mode
Fan
Speed
AutoTemp
Med
Hi
Lo
Heat
EnergySaver
Cool
FanOnly
Check
Filter
Sleep
Temp/Timer
Temp/Timer
Remote
Sensing
Timer
Mode
Fan
Speed
AutoTemp
Med
Hi
Lo
Heat
EnergySaver
Cool
FanOnly
DO THIS:
PRESS

SLEEPPAD

LIGHT ON
YOU WILL SEE:
8
Air Conditioner Features(continued)

SLEEPFEATURE:

DO THIS:

PRESSTO RESET

LIGHT ON
YOU WILL SEE:
The Sleep Mode can be selected with a Heating or Cooling Mode. Note: In this “MODE” the selected cooling temperature
will increase by 2 degrees F, 30 minutes after the mode is selected. The temperature will then increase by another 2
degrees F,after an additional 30 minutes. This new temperature will be maintained for 7 hours before it returns to the
originally selected temperature. If this Mode is selected with Heat, the set temperature will Decrease at the same time
pattern. This ends the “Sleep” MODE and the unit will continue to operate as originally programmed. The “Sleep” MODE
programcan be cancelled at any time during operation by pressing “Sleep” MODE button.

CHECK FILTERFEATURE:

Note:This feature is a reminder to clean the Air Filter (See Care and Cleaning) for more efficient operation and cooling. The
LED (light) will illuminate after 250 hours of operation.To reset after cleaning the filter, press the “Clean Filter” button and
thelight will go off.

REMOTE SENSING FEATURE (on some models)

LIGHTPulsing On
&Off Intermittently
DOTHIS:
PRESSSENSING
STARTBUTTON Note:unit display show
“set”temperature Note:remote display is
actualtemperature at
remotecontrol only
YOU WILL SEE:
Note:This feature can be activated from the remote control .
Toactivate the remote sensing feature, point the remote control towards the unit and press the remote sensing start button.
The LIGHT on the unit control will pulse to indicate it received the signal.The LIGHT on the remote control will pulse each
timeit sends a signal. It will continue to send this signal until the feature is deactivated by pressing the remote sensing stop
button. If the unit does not receive the remote sensing signal during any 3 minute interval, the unit will keep to indicate the
remotesensing mode has ended. The display on the remote control indicates the temperature at the remote . The unit
displayindicates the set temperature.
ONLY
ONLY
Temp/Timer
FanFasterFanSlower
Temp/Timer
Cool Energy
Saver
Fan
Only
Sleep Auto
Temp
Timer
Start Stop
Remote
Sensing