FrogPad USB Pressing Space by itself generates a space, Press Symbol again to cancel Symbol Mode

The Basics

SHIFT

Press <Shift> ONCE to activate Temporary Shift Mode. The Shift Light blinks to indicate that CapsLock will be applied to the next letter.

LHL Shown here

FROGGY'S

QUICK GUIDE!

NOTE: When referring to both Left & Right Layouts, highlighted Commands will be in <RED> .

NOTE: The <GUI> Key is the same as: WIN,

APPLE

Once the letter is entered, CapsLock will then be cancelled (unless <Shift> is held down).

Press and hold <Shift> and press any sequence of letters to get a series of capitalized letters. (Temporary Shift Mode is still active and is indicated by the blinking of the Shift light.)

..CapsLock	Frog
	How to

Default Setting

With all lights off the FrogPad is in the Letter Mode for lowercase letters. Press and release any letter key to get the primary letter for the key. Hold the key down and the letter repeats.

ENTER

Press <Enter> to Enter (to start a new line, paragraph, execute an action, etc.). "Period" is located here too. To access a Period, press both the <Enter> key and the <Space> key at the same time.

SPACE

Pressing <Space> by itself generates a space.

Press <Space> and any letter key simultaneously to obtain the secondary bottom-left GREEN letter for that key. The <F> and <A> keys have tab and apostrophe, respectively. The <U> and <I> keys have no secondary effect.

LHL Shown here

Pressing <Space> simultaneously with <Symbol> or <Enter> will generate a comma or a period, respectively.

Other letter-key actions (shifting, repeat, etc.) with <Space> are similar to those without <Space>.

If you want CapsLock press the <Shift> key TWICE (Shift Light will remain on). To release CapsLock, press the <Shift> key TWICE.

If you want ShiftLock press the <Shift> and <Space> keys simultaneously. To release repeat this step.

The Shift Light blinks to indicate that <Shift> will be applied to the next letter but that <Shift> will be turned off after that letter (unless <Shift> is held down). It is on continuously to indicate that Shift Lock is on; in this case, pressing <Shift> causes it to blink off & on periodically.

SYMBOL

Press <Symbol> to activate Symbol Mode. Press the symbols on the right of each key with or without <Space> to obtain symbols.

Press <Symbol> again to cancel Symbol Mode.

NUMBER

Press and release <Number> to activate the Keypad Number Mode (aka NumLock). In this mode, view the numbers and numeric symbols on the bottom-edge of the key. You now have a 10-key keypad. Pressing a number key with <Space> gets the function keys (F1, F2, etc.). Press <Number> to cancel the Keypad Number Mode.

Note: the NumLock light and the Number light are on in this mode.

6 FrogPad Manual