DWHITE BALANCE

For natural colors, select DWHITE BALANCE in the shooting menu and choose a setting that matches the light source.

Option

Description

AUTO White balance adjusted automatically.

hMeasure a value for white balance. i For subjects in direct sunlight. j For subjects in the shade.

k Use under “daylight” fluorescent lights. l Use under “warm white” fluorescent lights. m Use under “cool white” fluorescent lights. n Use under incandescent lighting.

If AUTO does not produce the desired results (for example, when taking close-ups), select h and measure a value for white balance or choose the option that matches the light source.

1

•At settings other than h, auto white balance is used with the flash. Lower the flash (P 42) to take pictures at other settings.

•Results vary with shooting conditions. Play pictures back after shooting to check colors in the monitor.

■h: Custom White Balance

Choose h to adjust white balance for unusual lighting conditions. White balance measurement options will be displayed; frame a white object so that it fills the monitor and press the shutter button all the way down to measure white balance.

If “COMPLETED!” is displayed, press MENU/OK to set white balance to the measured value. This value can be reselected by pressing MENU/OK when custom white balance options are displayed.

If “UNDER” is displayed, raise exposure compensation (P 53) and try again.

If “OVER” is displayed, lower exposure compensation and try again.

2

To give a deliberate color cast to your photographs, measure a value for custom white balance using a colored instead of a white object.

Photography on More

55