Product Features and Precautions for Use

■After Use

Perform the following steps after using the camera underwater or in locations where foreign matter might adhere to the camera body.

1Securely close the battery-chamber cover and rinse the camera un- der the tap or leave it in a basin of fresh water for about ten minutes.

2Remove water from the camera with a soft, dry cloth and leave it to dry in a well-ventilated location in the shade.

3After confirming that the camera has dried and is free of water droplets, open the battery- chamber cover and use a soft, dry cloth to remove any water, dust, or other foreign matter from the battery chamber.

QRemove any foreign matter from the water-resistant seal and adjacent surfaces. Foreign mat- ter could damage the seal, lowering water resistance.

QLiquid soaps, detergents, alcohol, and other cleansers may affect water resistance and should never be used.

QAfter use, remove water droplets and foreign matter with a dry cloth, firmly latch the battery- chamber cover, and soak the camera in fresh water for about ten minutes. Dry the camera thoroughly after removing it from the water.

xiii