Confidential: FUJIFILM Service Center Use Only XF56mmF1.2 R Simple Manual -For Repair Centers without the Lens Repair Training- Sequence
Item Mode
Preparations for adjustment
(measurement points, subject, other)
Method of adjustment
(VRs, waveforms, required values)
Measuring
equipment
and jigs
5 Aperture operation
check
A(Aperture
Priority)
(1) Turn the Aperture ring.
(2) Set the aperture to the [f/16].
(3) Press the shutter button halfway
(S1).
(4) Turn aperture a 1/3-step in the
direction of [f/1.2].
(5) Press the shutter button halfway
(S1).
(6) Repeat (4) to (5) until aperture
position reaches [f/1.2] (23
positions in all).
(1) Check if there is no abnormal
noise.
Check if the zoom moves
smoothly.
Check if there is clicking, and
there is no stopping other than
at defined positions.
(2) Check if the Aperture value is
displayed.
(3) Check if there is no abnormal
noise (aperture blades).
Check if the zoom moves
smoothly (aperture blades).
Check if aperture blades open
with the smallest setting seen
from the front.
(4) Check if each aperture value is
displayed on the monitor.
(5) Check if there is no abnormal
noise (aperture blades).
Check if the zoom moves
smoothly (aperture blades).
Check if aperture blades open
with a little wider than (3) (or
(5)) seen from the front.
Standard
camera
X-Pro1
6 Shooting check P mode
Focus
mode[S]
(1) Set an SD card to the camera.
(2) Shoot a subject with appropriate
brightness and at an
appropriate distance.
(3) Set the camera to Playback
mode.
(3) Check if there is no noticeable
abnormality with exposure.
Standard
camera
X-Pro1