Confidential: FUJIFILM Service Center Use Only

XF56mmF1.2 R Simple Manual

-For Repair Centers without the Lens Repair Training-

2. Inspection

2-1. Inspection and Factory Settings

<Applies only to general cameras for repair>
Sequence
Item Mode
Preparations for adjustment
(measurement points, subject, other)
Method of adjustment
(VRs, waveforms, required values)
Measuring
equipment
and jigs
1 Appearance check (1) Check lens visually and by
touching.
* Check parts replaced.
(1) There are no noticeable
scratches, cracks, or smudges,
or noticeable abnormalities with
coating.
There is no mistaken lettering,
noticeably out of place, or
abnormal coloring.
2 Appearance check (1) Check lens visually and by
touching.
* All of exterior.
* Check the lens compared to the
condition when you received it.
(1) • There are no defects in parts.
• There is no looseness in
screws.
• There is no leak of oil.
• There is no extra glue.
• There are no rough edges on
surface that could hurt
fingers.
• Be sure the letter “H” on the
name plate comes under the
indicator.
• There are no noticeable gaps
or unevenness compared to a
product.
• There are no stains and
smudges.
3 Lens attach and
release check
(1) Attach the lens to a camera
(2) Remove the lens.
(3) Attach the lens again.
(1) Lens can be attached smoothly.
(2) Lens can be removed smoothly.
Standard
camera
X-Pro1
4 Focus operation
check
P mode
Focus
mode [M]
(1) Turn the camera on.
(2) Turn the Focus ring.
(3) Focus moving noise.
(4) Focus operation.
(1) Check the LCD monitor.
(2) Check if the zoom moves
smoothly.
(3) Check if there is no abnormal
noise.
(4) Check if the zoom moves
smoothly.
Standard
camera
X-Pro1

5