7776
Notes on Using Your Camera Correctly
■ Places to Avoid
Do not store or use the camera in the following types of
locations:
hIn the rain or in very humid, dirty or dusty places.
hIn direct sunlight or in places subject to extreme
temperature rises, such as in a closed car in summer.
hExtremely cold places.
hPlaces subject to strong vibration.
hPlaces affected by smoke or steam.
hPlaces subject to strong magnetic fields (such as near
motors, transformers or magnets).
hIn contact with chemicals such as pesticides or next to
rubber or vinyl products for long periods of time.
■ Notes on Immersion in Water or Sand
The FinePix2800 ZOOM is particularly adversely affected
by water and sand. When you are at the beach or close to
water, ensure that the camera is not exposed to water or
sand. Take care also not to place the camera on a wet
surface. Water or sand inside the camera can cause faults
that may be irreparable.
■ Notes on Condensation
If the camera is carried suddenly from a cold location into a
warm place, water droplets (condensation) may form on
the inside of the camera or on the lens. When this occurs,
switch the camera off and wait an hour before using the
camera. Condensation may also form on the SmartMedia
card. In this event, remove the SmartMedia and wait a
short time before using it again.
■ When the Camera is Unused for Long Periods
If you do not intend to use the camera for a long period, of
time remove the batteries and the SmartMedia card before
storing the camera.
■ Cleaning Your Camera
hUse a blower brush to remove dust from the lens, LCD
monitor screen or viewfinder as these surfaces, and then
wipe lightly with a soft, dry cloth. If any soiling remains,
apply a small amount of lens cleaning liquid to a piece of
FUJIFILM lens cleaning paper and wipe gently.
hDo not scratch hard objects against the lens, LCD
monitor screen or viewfinder as these surfaces are easily
damaged.
hClean the body of the camera with a soft, dry cloth. Do
not use volatile substances such as thinners, benzine or
insecticide, as these may react with camera body and
cause deformation or remove the coating.
■ Using the Camera Overseas
When travelling overseas, do not place your camera in the
check-in baggage. Baggage handling at airports may
subject baggage to violent shocks, and the camera may be
damaged internally even when no external damage is
visible.
eBe sure to read this information in conjunction with “Safety Notes” (➡P.92), to ensure that you use
your camera correctly.

hSM-R2 Image Memory Card Reader

The SM-R2 provides a quick and easy way to transfer images back and forth
between your PC and an image memory card (SmartMedia). The SM-R2 uses the
USB interface for high-speed file transfer.
hCompatible with Windows 98/98SE, Windows Me, Windows 2000 Professional,
iMac or Power Macintosh PCs which support USB as standard.

Accessories Guide

hPC-AD3 PC Card Adapter

The PC Card Adapter allows the SmartMedia to be used as a PC Card Standard
ATA-compliant (PCMCIA 2.1) PC card (Type II).
hCompatible with SmartMedia of 5V/3.3V, 2MB to 128MB.

hFD-A2 Floppy Disk Adapter (FlashPath)

This adapter is the same size and shape as a 3.5-inch floppy disk. You can copy
the images on a SmartMedia to your PC simply by loading the SmartMedia into the
floppy disk adapter and then inserting the adapter into your floppy disk drive.

hDM-R1 Image Memory Card Reader

This device provides a simple way to transfer image data in either direction
between your PC and an image memory card (SmartMedia or CompactFlash
Type II (Microdrive-compatible)).
The IEEE 1394 interface provides high-speed data transfer.
hCompatible with Windows 98SE, Windows 2000 Professional (read-only), iMacDV
and Power Macintosh PCs with FireWire as a standard feature. Mac OS 8.5.1 to 9.1
Compatible OS Compatible SmartMedia
Windows 95/98/98SE/Me/NT4.0
Mac OS 7.6.1 to 9.1 5V/3.3V, 2MB to 128MBFD-A2
PC CARD
ADAPTER