Problems and Solutions
Connections/Miscellaneous
| Problem |
| Solution |
|
|
| • | The camera is not properly connected: Connect the camera properly (P40). |
|
|
| • An A/V cable was connected during movie playback: Connect the camera once movie playback has ended. | ||
| No picture or sound. | • | Input on the television is set to “TV”: Set input to“VIDEO”. | |
| • | The camera is not set to the correct video standard: Match the camera QVIDEO SYS- | ||
|
| |||
|
|
| TEM setting to the TV (P71). | |
|
| • | The volume on the TV is too low: Adjust the volume. | |
| No color | Match the camera QVIDEO SYSTEM setting to the TV (P71). |
| |
| The computer does not | Be sure the camera and computer are correctly connected (P49). | ||
| recognize the camera. | |||
|
|
|
| |
| Pictures can not be | • The camera is not properly connected: Connect the camera correctly (P41). |
| |
| printed. | • | The printer is off: Turn the printer on. |
|
| Only one copy is printed/ | The printer is not PictBridge compatible. | ||
| the date is not printed. |
|
|
|
| The camera is unre- | • Temporary camera malfunction: Remove and reinsert the battery (P8). |
| |
| sponsive. | • |
| |
| The camera does not | Remove and reinsert the battery (P8). If the problem persists, contact your FUJIFILM dealer. | ||
| function as expected. | |||
|
|
|
| |
| No sound. | Turn silent mode off (P65). | ||
| Date and time added by |
|
|
|
| SDATE STAMP | The camera clock is not correctly set: Reset the date and time (P15). | ||
| are not correct. |
|
|
|
| Date and time are added | T+ Uor Tis selected for SDATE STAMP option: Added shooting date and time | ||
| to the pictures. | can not be deleted from the pictures. To take pictures without date and time, select OFF for | ||
| SDATE STAMP (P71). |
| ||
|
| |||
| FinePixViwer can not be | FinePixViwer does not support Mac OS X 10.7 or later. Use the application supplied with Mac OS X | ||
| installed or run. | or |
| |
80 |
| Troubleshooting | ||