Green
6
105104
CONNECTING TO A PERSONAL COMPUTER
3 4
Orange
When you switch the camera on, your computer
recognizes the camera as a removable disk and
the indicator lamp on the camera lights green.
The indicator lamp glows orange when the
camera is communicating with the computer. Do
not open the SmartMedia slot cover or use any
of the other camera controls while the camera is
communicating with the computer.
●
!
The Auto Power Save function does not operate
when the camera is connected to a computer.
●
!
See P.106 for the procedure for disconnecting the
camera from your computer.
Files can be transferred in either direction
between the camera and the computer. You
can also customize the camera (➡P.107).
DIGITAL
(USB)socket
1 2
➀Load a SmartMedia containing photographed
images.
➁Set the Mode dial to “2”.
Plug one end of the special USB cable
(supplied) into the digital (USB) socket on the
camera and then plug the other end into your
computer.
●
!
The AC power adapter should be used for this
operation (➡P.18).
If Windows driver installation has started, refer
to the Software Quick Start Guide booklet.
Install the software by referring to the
Software Quick Start Guide booklet for the
installation procedure.
4
●
➀●
➁