FUJICOLOR QuickSnap Marine • FUJIFILM PRODUCT INFORMATION BULLETIN
4. HANDLING PROCEDURES FOR LABORATORY PROCESSING
Opening the Waterproof Housing and Removing the Main Unit
1.Insert a screwdriver from the side into the slot on the
2.After removing the rear cover, insert the screwdriver into the slot on the side opposite the strap and lift up the main unit.
Screwdriver
Lift up main unit.
3. Remove the main unit by rotating the bottom part outward.
Rotate the bottom outward.
The procedure for removing the film cartridge is identical to that for QuickSnap Super.
CAUTION
•When using a screwdriver or similar tool, exercise caution so that the pointed end of the tool will not cause hand injuries.
•Always wear goggles when removing the film cartridge because fragments of broken plastic may fly off.
– 3 –
