Troubleshooting
Problems and Solutions
■Power and Battery| Problem | Solution | |
| • The battery is exhausted: Charge the battery or insert a | |
The camera does not | • The battery is inserted incorrectly: Reinsert in the correct orientation (P10). | |
• The | ||
turn on. | ||
• The AC power adapter and DC coupler are connected incorrectly: Reconnect the AC power | ||
| ||
| adapter and DC coupler. | |
| • The battery is cold: Warm the battery by placing it in a pocket or other warm place and reinsert | |
| it in the camera immediately before taking a picture. | |
| • There is dirt on the battery terminals: Clean the terminals with a soft, dry cloth. | |
| • oCLEAR DISPLAY is selected for ZPOWER MANAGEMENT > POWER | |
| MANAGEMENT: Select nPOWER SAVE to reduce the drain on the battery (P95). | |
The battery runs down | • ON is selected for ASCREEN | |
quickly. | OFF to reduce the drain on the battery (P7). | |
| • Ris selected for shooting mode: Select Bmode to reduce the drain on the battery (P23). | |
| • uCONTINUOUS or xTRACKING is selected for FFOCUS MODE: Select a | |
| different AF mode (P80). | |
| • The battery has been charged many times: The battery has reached the end of its charging | |
| life. Purchase a new battery. | |
The camera turns off | • The battery is exhausted: Charge the battery or insert a | |
• The AC power adapter or DC coupler has been disconnected: Reconnect the AC power | ||
suddenly. | ||
adapter and DC coupler. | ||
| ||
Charging does not start. | Reinsert the battery in the correct orientation and make sure that the charger is plugged in (P8). |
105