FujiFilm A205, A210 Warning EC Declaration of Conformity, IMPORTANT

Warning EC Declaration of Conformity

We

Name:Fuji Photo Film (Europe)G.m.b.H.

Address:Heesenstrasse 31

40549 Dusseldorf, Germany

declare that the product

Product Name: FUJIFILM DIGITAL CAMERA FinePix A205/FinePix A210

Manufacture’s Name: Fuji Photo Film Co., Ltd.

Manufacture’s Address:26-30, Nishiazabu 2-chome, Minato-ku,

Tokyo 106-8620, Japan

is in conformity with the following Standards

Safety:EN60065

EMC:EN55022:1998 Classe B

EN55024:1998

EN61000-3-2: 1995 +A1:1998 +A2:1998

following the provision of the EMC Directive (89/336/EEC, 92/31/EEC and

93/68/EEC)and Low Voltage Directive (73/23/EEC).

Dusseldorf, Germany July 1, 2003

Place Date Signature/Managing Director

Bij dit produkt zijn batterijen geleverd. Wanneer deze leeg zijn, moet u

ze niet weggooien maar inleveren als KCA

IMPORTANT Be sure to read this page before using the Software.

For customers in the U.S.A.

Tested To Comply

With FCC Standards

FOR HOME OR OFFICE USE

FCC Statement

This device complies with part 15 of the FCCRules. Operation

is subject to the following two conditions: (1) This device may

not cause harmful interference, and (2) this device must

accept any interference received, including interference that

may cause undesired operation.

CAUTION

This equipment has been tested and found to comply with the

limits for a Class B digital device, pursuant to Part 15 of the

FCC Rules. These limits are designed to provide reasonable

protection against harmful interference in a residential

installation. This equipment generates, uses, and can radiate

radio frequency energy and, if not installed and used in

accordance with the instructions, may cause harmful

interference to radio communications. However, there is no

guarantee that interference will not occur in a particular

installation. If this equipment does cause harmful interference

to radio or television reception, which can be determined by

turning the equipment off and on, the user is encouraged to try

To prevent fire or shock hazard, do not expose the unit to rain or moisture.

to correct the interference by one or more of the following

measures:

— Reorient or relocate the receiving antenna.

— Increase the separation between the equipment and receiver.

— Connect the equipment into an outlet on a circuit different from

that to which the receiver is connected.

— Consult the dealer or an experienced radio/TV technician for

help.

You are cautioned that any changes or modifications not

expressly approved in this manual could void the user’s authority

to operate the equipment.

Notes on the Grant:

To comply with Part 15 of the FCC rules, this product must be

used with a Fujifilm-specified ferrite-core A/V cable, USB cable

and DC supply cord.

For customers in Canada

CAUTION

This Class B digital apparatus complies with Canadian ICES-003.

Please read the Safety Notes (➡P.81) and make sureyou understand them before using the camera.

NOTICE

BEFORE OPENING THE PACKAGE OF CD-ROM

PROVIDED BY FUJI PHOTO FILM CO., LTD., PLEASE

READ THIS END USER LICENSE AGREEMENT

CAREFULLY. ONLY IF YOU DO AGREE TO THIS

AGREEMENT, YOU WILL BE ABLE TO USE THE

SOFTWARE RECORDED ON THE CD-ROM. BY OPENING

THE PACKAGE, YOU ACCEPT AND AGREE TO BE

BOUND BY THIS AGREEMENT.

End User License Agreement

his End User License Agreement (“Agreement”) is an agreement between

Fuji Photo Film Co., Ltd. (“FUJIFILM”) and you, which sets forth the terms

and conditions of the license granted for you to use the software provided by

FUJIFILM.

The CD-ROM contains third party software. In case a separate agreement is

provided by a third party supplier for its software, the provisions of such

separate agreement shall apply to the use of such third party software,

prevailing over those of this Agreement.

1. Definitions.

(a) “Media” means the CD-ROM titled “Software for FinePix SX” which is

provided to you together with this Agreement.

(b) “Software” means the software which is recorded on Media.

related written materials which are provided to you together with

Media.

(d) “Product” means Media (including Software) and Documentation

collectively.

2. Use of Software.

FUJIFILM grants to you a nontransferable, nonexclusive license:

(a)

to install one copy of Software onto one computer in binary machine

executable form;

(b) to use Software on the computer onto which Software is installed;

and

3. Restrictions.

3.1 You shall not distribute, rent, lease or otherwise transfer all or any

part of Software, Media or Documentation to any third party without

FUJIFILM’s prior written consent. You also shall not sublicense,

assign or otherwise transfer all or any part of the rights granted to

you by FUJIFILM under this Agreement without FUJIFILM’s prior

written consent.

3.2 Except as expressly granted by FUJIFILM hereunder, you shall not

copy or reproduce all or any part of Software or Documentation.

3.3 You shall not modify, adapt or translate Software or Documentation.

You also shall not alter or remove copyright and other proprietary

notices that appear on or in Software or Documentation.

3.4 You shall not, or shall not have any third party, reverse-engineer,

decompile, or disassemble Software.

4. Ownership.

All copyrights and other proprietary rights to Software and

Documentation are owned and retained by FUJIFILM or the third party

suppliers as indicated on or in Software or Documentation. Nothing

contained herein shall be construed, expressly or implicitly, as

transferring or granting any right, license, or title to you other than those

explicitly granted under this Agreement.

5. Limited Warranty.

FUJIFILM warrants to you that Media is free from any defect in material

and workmanship under normal use for ninety (90) days from the date of

your receipt of Media. Should Media not meet the foregoing warranty,

FUJIFILM shall replace such defective Media with other Media bearing

no defect. FUJIFILM’s entire liability and your sole and exclusive remedy

with regard to any defect in Media shall be expressly limited to such

FUJIFILM’s replacement of Media as provided herein

6. DISCLAIMER OF WARRANTY.

EXCEPT AS PROVIDED IN SECTION 5 HEREIN, FUJIFILM

PROVIDES PRODUCT “AS IS” AND WITHOUT WARRANTIES OF

ANY KIND, EXPRESS OR IMPLIED. FUJIFILM SHALL MAKE NO

WARRANTY, EXPRESS, IMPLIED OR STATUTORY, AS TO ANY

OTHER MATTERS, INCLUDING, BUT NOT LIMITED TO NON-

INFRINGEMENT OF ANY COPYRIGHT, PATENT, TRADE SECRET,

OR ANY OTHER PROPRIETARY RIGHTS OF ANY THIRD PARTY,

MARCHANTABILITY, OR FITNESS FOR ANY PARTICULAR

PURPOSE.

7. LIMITATION OF LIABILITY.

IN NO EVENT SHALL FUJIFILM HAVE ANY LIABILITY FOR ANY

GENERAL, SPECIAL, DIRECT, INDIRECT, CONSEQUENTIAL,

INCIDENTAL, OR OTHER DAMAGES (INCLUDING DAMAGES FOR

LOSS OF PROFITS OR LOST SAVINGS) INCURRED FROM THE USE

OF OR INABILITY TO USE PRODUCT EVEN IF FUJIFILM HAS BEEN

ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.

8. No export.

You acknowledge that neither Software nor any part thereof, will be

transferred, or exported to any country or used in any manner in

violation of any export control laws and regulations to which Software is

subject.

9. Termination.

In case you breach any of the terms and conditions hereof, FUJIFILM

may immediately terminate this Agreement without any notice.

10. Term.

This Agreement is effective until the date when you cease to use

Software, unless earlier terminated in accordance with Section 9

hereof.

11.Obligation upon termination.

Upon termination or expiration of this Agreement, you shall, at

your own responsibility and expense, delete or destroy

immediately all Software (including its copies), Media and

Documentation.

12.Governing Law.

This Agreement shall be governed by and construed in

accordance with laws of Japan.