DC IN 3V
socket
(USB)
socket
63
Viewing Images
62

6.2 USING FinePixViewer

For all information on FinePixViewer functions, refer to “How to Use FinePixViewer” in the Help
menu for details.
■Example: Looking up slide shows
1Click “How to Use FinePixViewer” in the FinePixViewer Help menu.
2Click “Basic Operation” and then click “Basic Slide Show Operations” in the menu that appears.
3The “Basic Slid Show Operations” information is displayed. Press the “<<<” key to view the
previous page or the “>>>” key to view the next page.
6.2.1 Mastering FinePixViewer
Only perform this operation when you no longer require the installed software or when the software
was not installed correctly.
1Switch on your PC.
2Disconnect the camera (➡P.62).
3Quit all currently running applications.
4Close all files.
5Open the “My Computer” window, open the
“Control Panel”, and double-click “Add/Remove
Programs”.
6.2.2 Uninstalling the Software
Windows
◆Macintosh ◆
hTo read “How to Use FinePixViewer”...
You must install Adobe Systems’ Acrobat Reader. See P.54 for information on installing Acrobat
Reader.
●
!
For more information on using Acrobat Reader, refer to the Acrobat Reader “Help” menu.
hWhat is explained in “How to Use FinePixViewer”...
“How to Use FinePixViewer” covers a range of topics, including batch processing and ordering prints.

6.1 CAMERA CONNECTION

2Left-click the Eject icon in the taskbar and eject
“USB Disk”.
3The menu option shown below appears. Click on
this option.
4The “Eject hardware” dialog box appears. Click the [OK] button or the close button.
✽Screen for Windows Me
✽Screen for Windows Me
Macintosh
Drag the “Removable drive” icon on the desktop to
the Trash.
●
!
Dragging the icon to the Trash, “µ” appears on the
camera’s LCD monitor.
31Switch the camera off.
2Unplug the included USB cable from the
camera.
0102
Windows Me/2000 Professional/XP
1Right-click the removable disk icon in the “My
Computer” window and select Eject. This step is
only required in Windows Me.
6.1.4 Disconnecting the Camera
Windows 98/98 SE
For a DSC connection, proceed to step 2.
For a PC CAMERA connection, proceed to step 3.
1
2
1Quit all applications (FinePixViewer etc.) that are
using the camera.
2Check that the viewfinder lamp is lit green or that
the self-timer lamp is off (no data is being
exchanged with the computer).
Perform the steps shown below before you switch the camera off. This procedure differs
depending on the operating system software (or PC) you are using.
No PC operation is needed.
●
!
Even when “Copying” is no longer displayed on the computer,
the camera and the computer may still be exchanging data.
Always check that the viewfinder lamp is lit green or that the
self-timer lamp is off.
Continued
6The “Add/Remove Programs Properties” window
appears. Select the software to be uninstalled
(FinePixViewer or the driver) and then click the
[Add/Remove] button.
<To remove the driver software>
<To remove FinePixViewer>