17
1
16
SETTING THE DATE AND TIME

Changing the date and time

To change the date and time:
1Press the “MENU/OK” button.
2Use “d” or “c” to select “g” OPTION and
then use “a” or “b” to select “SET–UP”.
3Press the “MENU/OK” button.
4Select “DATE/TIME” and press “c”.
See P.14, 15 for information on setting the date
and time.
01030204

Power Save Function

If the camera is not used for 2 minutes, this
function automatically switches the camera off.
When this function is active, it also switches off
the LCD monitor to reduce power consumption if
the camera is not used for 30 seconds (See
P.74 for details).

Checking the remaining battery charge

Switch the camera on and check that no battery
level warning (Zor X) is displayed on the
LCD monitor. If no icon is displayed, there is
ample charge left in the battery.
iZLit red:
The battery is low on charge. Have a new
battery ready.
iXBlinking red:
The battery is exhausted. The display will shortly
go blank and the camera will stop working.
Replace or recharge the battery.
!
The above estimates are for the Still photography
modes. In Playback mode, the transition from
Z” to “X” may take less time.
0102
1Press “d” or “c” to select the date format.
2Press “aor “bto set the format. Refer to
the table below for details of the settings.
You can select your preferred date format.

To change the date display format

Displays the date in the “month/day/
year” format.
MM/DD/YYYY
Displays the date in the “day.month.
year” format.
DD.MM.YYYY
YYYY.MM.DD
Explanation
Setting
Displays the date in the “year.month.
day” format.