21
2
20
2Basic
Photography BASIC OPERATION GUIDE
Change frame in playback.
Digital zoom, Playback zoom.
Main actions performed by a, b, dand c
DISP button
You can use this button to select the LCD monitor display.
When shooting: Switches the LCD monitor on and off or displays
the framing guides.
During playback: Switches text display on and off or selects multi-
frame playback.
Power switch
Slide this switch to turn the camera on and off.
MENU/OK button
Displays the menu screen when you are
shooting or playing back images. You also
press this button to confirm a menu
selection.
BACK button
Press this button to stop a procedure midway through.
Switching between still photography,
playback and movies
QStill photography: For recording still
images.
wPlayback: For playing back recorded
data.
TMovie: For recording movies (P.46).
You’ve read the chapter on getting ready and the camera is now set up and ready to take pictures.
The Basic Photography section explains the three basic steps of “taking pictures”, “viewing pictures” and
“erasing pictures”. Master the basic steps by actually trying them out on the camera as you go.

SETTING THE DATE AND TIME

Power Save Function

If the camera is not used for 2 minutes, this
function automatically switches it off.
When this function is enabled, the LCD
monitor switches off to conserve battery
power if the camera is not used in any way
for 30 seconds (See P.68 for details).

Checking the remaining battery charge

Switch the camera on and check that no battery
level warning (Zor X) is displayed on the
LCD monitor. If no icon is displayed, there is
ample charge left in the batteries.
iZLit red:
Battery charge low. Replace or recharge the
battery as it will run out shortly.
iXBlinking red:
The batteries are exhausted. The display will
shortly go blank and the camera will stop
working. Replace or recharge the batteries.
!
The above estimates are for the Still photography
modes. In Playback mode, the transition from
Z” to “X” may take less time.