0102

67

5

66

SETUP Menu Options

Settings Display Explanation
IMAGE DISP.
POWER SAVE
DATE/TIME
ON/OFF
ON/OFF
SET
Default
setting
ON
ON
QLCD ON/OFF ON
BEEP FLOW/HIGH/OFF LOW
RESET ALL OK
This option specifies whether or not an image checking screen (photography
results) is displayed after you take a shot.
The photography results are displayed for about 2 seconds and then automatically
recorded.
If the camera is not used for approximately 30 seconds, this function temporarily
switches off the LCD monitor. See P.68 for details.
Use this option to correct the date or time. See P.18 for details.
Use this option to specify whether the LCD monitor is automatically switched ON or
OFF when the Mode switch is set to “Q”.
This setting selects the volume of the beep emitted by the camera during camera operation.
DISCHARGE OK Discharges rechargeable batteries. See P.13 for details.
This resets all camera settings (including the photography and playback menu
settings) other than the date and time to the factory default values set at shipment.
When you press “c”, a confirmation screen appears. To proceed, press the
“MENU/OK” button again.

List of settings

AAUTO
SMANUAL
LCD BRIGHTNESS (P.65)
SET–UP
QStill photography mode
LCD BRIGHTNESS (P.65)
SET–UP
TMovie mode
LCD BRIGHTNESS (P.65)
SET–UP
wPlayback mode

1Press “a” or “b” to select a menu option and

then press “d” or “c” to change the setting.

2Press the “MENU/OK” button.

Set the SET–UP in “Q”, “w” or “T” mode.

1Press the “MENU/OK” button to display the

menu screen.

2Press “d” or “c” to select “g” OPTIONS and

then press “a” or “b” to select “SET–UP”.

3Press the “MENU/OK” button.

!
Press “c” for “DATE/TIME” or “RESET ALL”.
2
!
The LCD monitor shown is for still photography.
gUSING SET–UP
030102
1