The Setup Menu

gLCD BRIGHTNESS

Press the selector up or down to choose monitor brightness and press MENU/OK to select.

LCD BRIGHTNESS

0

SET CANCEL

oAUTO POWER OFF

Choose the length of time before the camera turns off automatically when no operations are performed. Shorter times increase battery life; if OFF is selected, the camera must be turned off manually. Note that regardless of the

aLCD MODE

If ON is selected, the monitor will dim to save power if no operations are performed for several seconds. Full brightness can be restored by pressing the shutter button halfway. The monitor does not dim in movie mode or during playback.

option selected, the camera will not turn off automatically when connected to a printer (pg.

44)or computer (pg. 54) or when a slide show is in progress (pg. 65).

BTip: Reactivating the Camera

To reactivate the camera after it has turned off automatically, use the nbutton or press the D button for about a second (pg. 9).

ANote

Although OFF is selected for oAUTO POWER OFF, the camera will turn off automatically if no operations are performed for five minutes in the following case:

•STANDBY is displayed in A.

•Bis displayed in the shooting mode.

78