Battery NP-45

Nominal voltage

DC 3.7V

Nominal capacity

740 mAh

Operating temperature 0°C to +40°C (+32°F to +104°F)

Dimensions

31 mm × 39.4 mm × 5.7 mm (1.2 in.

 

× 1.6 in. × 0.2 in.) (W × H × D)

 

 

Mass (Weight)

Approx. 15 g (0.5 oz.)

 

 

 

Battery Charger BC-45A

Rated input

110-240 V AC, 50/60 Hz

 

 

Input capacity

9.0 VA (100 V)

 

10.8 VA (240 V)

 

 

Rated output

4.2 V DC, 550 mA

 

 

Applicable batteries

Rechargeable Battery NP-45

 

 

Charging time

Approx. 100 minutes

 

 

Dimensions

Wall type: 101.7 mm × 56 mm × 20

 

mm (4.0 in. × 2.2 in. × 0.8 in.) (L × W

 

× D)

 

Cord type: 85 mm × 54 mm × 20 mm

 

(3.3 in. × 2.1 in. × 0.8 in.) (L × W × D)

 

 

Mass (Weight)

Wall type: Approx. 66 g (2.3 oz.)

 

(excluding batteries)

 

Cord type: Approx. 56 g (2.0 oz.)

 

(excluding batteries)

Operating

0°C to + 40°C(+ 32°F to + 104°F)

temperatures

Notes on Using the Battery Charger

Use with the following power supply cord set:

Cord: UL Listed, Type SPT-2, No.18 AWG, rated 300V, 10A, minimum 4 ft (1.2m), maximum 10 ft (3m) long. One end terminates in a molded-on, parallel-blade, (non- polarized) attachment plug with a 7A, 125V (NEMA 1- 15P) configuration.

The battery and battery charger themselves will become warm due to the power stored inside them. This is normal and does not indicate a fault. Wherever possible, use the battery charger in a well-ventilated location.

There may be vibration noises from inside the battery charger during use. This is normal and does not indicate a fault.

Do not use the battery charger to charge batteries other than rechargeable battery NP-45.

The battery charger could cause interference if placed close to a radio during charging. In this event, move the radio and charger further apart.

Do not leave the battery charger in the following types of locations:

Extremely humidity or high temperatures, such as close to a heating appliance or in direct sunlight

Places with strong vibration

In very dusty places

The battery charger accepts input voltages of 110-240 V AC at 50 or 60 Hz and can be used all over the world. However, the shape of the plug and socket-outlet depends on the country of use. Consult your travel agent for details.

Continued Q

121