Installation on a Windows PC
ZHard ware (software) requirements and recommended system
To run this software, you must have the hardware and software described below. Check your system before you begin the installation.
Requirement |
| Recommendation |
| |
| Windows 98 SE | Windows XP | Windows Vista | |
| Windows Millennium Edition (Windows Me) |
|
| |
Operating | Windows 2000 Professional*2 |
|
| |
System*1 | Windows XP Home Edition*2 |
|
| |
| Windows XP Professional*2 |
|
| |
| Windows Vista*2 |
|
| |
CPU | 200 MHz Pentium minimum | 2 GHz Pentium 4 or | 3 GHz Pentium 4 or | |
(Windows XP/Vista users: 800MHz Pentium 4 or better recommended) | better | better | ||
| ||||
RAM | 128 MB minimum (512 MB minimum for Windows Vista) | 512 MB or better | 1 GB or better | |
Hard disk | Amount required for installation: 450 MB minimum | 2 GB or better | 15 GB or better | |
space | Amount required for operation: 600 MB minimum |
|
| |
Display | 800 × 600 pixels or better, | 1024 × 768 pixels or better, Highest (32 bit) | ||
|
|
|
|
*1 Models with one of the above operating systems
*2 When you install the software, login using a system administrator account (e.g. “Administrator”).
CAUTION
•Note that the software to be installed is different depending on the OS. (Windows 98SE/Me: FinePixViewer, Windows 2000/XP/
Vista: FinePixViewer S)
•Additional USB interface board is not guaranteed.
•Windows 95, Windows NT and Windows 98 cannot be used.
•Operation is not guaranteed on
92