8786
6. Display switches to the capture window and the live image is
displayed. If the live image does not appear, click the [Live]
button 1.
✽Recording has not yet started.
7. Use the [Drives] button 2to select “USB PC Camera”.
To rotate a live image, click the “Source” button and specify a rotation angle in the “Roll”
setting in the “Camera Controls” tab sheet.
8. Click the [Record] button 3to start recording.
9. Click the [Record] button 3again to end recording.
✽The recorded images are not saved to a file.
■To check the images
Click the [Play] button 4.
■To save the images to a file and return to the Album window
1. When you click the [album] button, the Save dialog box
opens. Specify the save destination and click the [OK] button.
2. When the album storage confirmation dialog box appears,
click the [OK] button.
TIP
1 3 4
2
Capturing Live Images (Windows)qSee “Connection” in
the camera Owner’s
Manual.
If your camera has a PC Camera function, you can download live images to
your PC.
1. Connect the camera to your PC in “PC
Camera” mode.
• Always use the correct procedure when disconnecting the camera from your PC or
switching the camera off.
• Do not perform any of the following when the camera is connected to a PC as this
may cause the PC to hang:
Disconnect the USB cable or AC power adapter / Touch the camera controls (power
switch, control buttons, lens cover or slot cover)
2. If FinePixViewer starts up, quit FinePixViewer.
3. In the “Start” menu, select “Programs” /“ArcSoft
VideoImpression” /“ArcSoft VideoImpression 1.6FP”.
4. When the startup screen appears,
click the [new] button.
5. When the album window opens,
click the [capture] button.
NOTE