FujiFilm F100fd side, space, Remedy, camera, camera, [rBUSY], formatted, free space, Explanation, • Camera fault, [\MEMORY FULL], [YMEMORY FULL], from “100-0001”)

Warning Displayed	Explanation	Remedy
	• The Memory Card contact area is soiled.	• Wipe the contact area on the Memory Card with a
	• The Memory Card format is incorrect.	soft, dry cloth. It may be necessary to format the
		Memory Card (➝p.113). If the message still
[CARD ERROR]		appears, replace the Memory Card.
	• Camera fault.	• Contact your FUJIFILM dealer.
	• The Memory Card is damaged.	• Insert a compatible Memory Card that is
	• Inserted Memory Card is not compatible with your
	camera.	operationchecked at FUJIFILM Corporation.
[\MEMORY FULL]	The internal memory or Memory Card is full.	Erase some images in internal memory or Memory
		Card (➝p.45), or use a Memory Card that has ample
[YMEMORY FULL]		free space.
	• The data could not be recorded due to a Memory	• Re-insert the Memory Card or turn the camera off
	Card error or a connection error between the	and then on again. If the message still appears,
	Memory Card and camera.	contact your FUJIFILM dealer.
[WRITE ERROR]	• The image cannot be recorded as it is too large to	• Use a new Memory Card.
	fit in the available space on the Memory Card.	• Format the Memory Card or internal memory on
	• The Memory Card or internal memory is not
	formatted.	the camera (➝p.113).
[PROTECTED CARD]	The SD Memory Card switch is slide to the “Lock”	Unlock the protection by sliding it back (➝p.20).
	side.
[INTERNAL MEMORY IS	The data could not be recorded or copied since the	Erase some images from the internal memory
FULL	internal memory is full.	(➝p.45), or use a Memory Card that has ample free
INSERT A NEW CARD]		space.
			Appendices
[rBUSY]	The timing for recording was incorrect because the	Use an Memory Card that was formatted on the
	Memory Card was formatted on a PC.	camera.
	The frame number has reached 999-9999.	AInsert a formatted Memory Card into the camera.
[FRAME NO. FULL]	No more pictures can be taken.	BSet [RENEW] as [FRAME NO.] setting in the [U
		SET-UP] menu (➝p.111).
		CStart taking pictures (The frame number starts
		from “100-0001”).

Continued Q

137