Auto power off function

When the Auto power off function is active, if the camera is left unused for 2 or 5 minutes, this function turns the camera off (➝p.114). To turn the camera back on, press POWER. To play back images, hold down wfor about 1 second.

MEMO

When [POWER MANAGEMENT] is set to [ QUICK AF] or [ CLEAR DISPLAY], [AUTO POWER OFF] cannot be cancelled.

Checking the battery charge

Turn the camera on and check the battery level indicator on the LCD monitor.

AThere is ample battery charge. (Lit white)

BThe battery is almost half charged. (Lit white)

CThere is insufficient charge left in the battery. The battery will soon run out. Have a charged battery ready. (Lit red)

DThe battery is depleted. The display will shortly go blank and the camera will stop working. Replace the battery. (Blinking red)

CAUTION

•Due to the nature of the battery, the battery level

indicator ( ,, or V) may appear early when the camera is used in cold locations. Try warming the battery in your pocket or a similar location before use.

•Battery with no remaining charge (Vblinking red) may cause camera faults such as the camera turning itself off without retracting the lens. Always load a fully charged battery.

•Depending on the camera mode, the transition from to Vmay occur more quickly.

Ready Getting

23