52 53

3
1Press the MENU/OK button to start
recording the voice memo.
2During voice memo, the remaining time is
shown on the LCD monitor and the self-timer
lamp blinks.
3When the time remaining reaches 5 seconds,
the self-timer lamp starts flashing quickly.
When you have recorded 30 seconds of
comment, the message appears on
the LCD monitor.
To finish:Press the MENU/OK button.
To re-record your comment:Press the BACK
button.
!
To end your comment during recording, press the
MENU/OK button.
!
Depending on the available space on the SmartMedia,
the available recording time may be shorter.
!
Even if the LCD monitor is switched off, it
automatically switches on when you take a picture
using the Voice memo function. The LCD monitor
switches off again when audio recording ends.
!
If you do not want to record a voice memo, press the
BACK button. Note that the image will still be
recorded.
Take a picture as normal. The ®
message then appears on the LCD monitor.
When you set Voice memo to ON, Y appears
on the LCD monitor.
Immediately after you take a shot, you can add a
voice memo (comment) up to 30 seconds long
to that image.
hRecording format: WAVE (P.129)
PCM recording format
Audio file size: Approx. 240 KB
(for a 30-second voice memo)

YVOICE MEMO (DURING SHOOTING)

PHOTOGRAPHY MENU
Face the microphone (P.8) on the front of
the camera to record your comments. Hold
the camera roughly 20 cm (7.9 in.) away for
the best results.
Beep
21 3 01
02
034