14 15

1
When you first switch the camera on, the date is
cleared. Press the “MENU/OK” button to set the
date and time.
Press the “O” (power) button to switch the
camera on and off. When you switch the camera
on, the viewfinder lamp lights (green).
1 2
DC IN 5V socket
Check that the camera is switched off. Plug the
AC power adapter connector into the DC IN 5V
socket on the camera and then plug the adapter
itself into the main power outlet.
The self-timer lamp lights red and battery
charging begins. When charging is completed,
the self-timer lamp switches off.
A fully discharged battery takes roughly 5 hours
to fully recharge (at an ambient temperature of
+21°C to +25°C (+70°F to +77°F)).
Use the AC power adapter in situations when a loss
of power will cause problems, such as during file
downloading (via the USB connection). Using the
AC power adapter also allows you to take pictures
and play back images without worrying about
depleting the batteries.
hCompatible AC power adapters
AC-5VS/AC-5VHS/AC-5VH
CHARGING THE BATTERY SWITCHING ON AND OFF •SETTING THE DATE AND TIME
●
!
Use only the FUJIFILM products listed above.
●
!
See P.116 for notes on using the AC power adapter.
●
!
Only connect or disconnect the AC power adapter when
the camera is switched off.
Connecting or disconnecting the AC power adapter while
the camera is switched on temporarily interrupts the
power supply to the camera, so that images or movies
being shot at the time are not recorded. Failing to switch
the camera off first can also result in damage to the
SmartMedia or malfunctions during PC connection.
●
!
Charging times increase at low temperatures.
●
!
If the self-timer lamp flashes during charging, a charging
error has occurred and the battery cannot be charged. If
this occurs, see P.122.
●
!
Switching the camera on during charging interrupts the
charging.
●
!
You can charge the battery more quickly by using the
BC-60 Battery Charger (sold separately) (➡P.111).
●
!
The shape of the plug and socket-outlet depends on the
country of use.
●
!
To set the date and time later, press the
“
BACK
”
button.
●
!
If you do not set the date and time, this confirmation
screen will appear each time you switch the camera on.

Using the AC Power Adapter

In “U” mode, the lens cover opens and the
lens extends. Take care not to press on
these precision components as this could
result in a fault or a “¨”
message being displayed on the LCD
monitor. Take care also not to leave
fingermarks on the lens as this will degrade
the picture quality.