54 55

Settings
4
OKOK CANCELCANCEL
SETSET
FOFO R M A T OK?OK?
ERASERASE AL L L D A T A
FOFO RMATM A T
SET-UP
When the camera is not used for 60 seconds, the
screen temporarily turns off (sleep mode) and the
viewfinder lamp blinks at 1-second intervals to save
power. If the camera remains unused for 2 or 5
minutes, it is turned off. Use this function when you
want to get the maximum possible running time
from your batteries.
●
!
The Power save setting is disabled during automatic
playback and discharging and when a USB connection is
being used.
POWER SAVE SETTING
FORMAT
Initialize (format) the xD-Picture Card for use with
the camera.
Because initializing the xD-Picture Carderases all
the frames (files), including protected frames (files).
Back up important frames (files) onto your PC or
another media.
1Press “d” or “c” to select “OK”.
2Pressing the “MENU/OK” button erases all the
frames (files) and initializes the xD-Picture
Card.
●
!
When “7”, “w”, “0” or
“-” appears, see P.82 for information
before formatting the xD-Picture Card.
0102
When the camera is in sleep mode, pressing the
shutter button down halfway wakes the camera up.
●
!
Pressing any other button as well as the shutter button wakes
the camera up.
SESE T
-
UPUP
POWER SAVEPOWER SAVE
FORMATFORMAT
2 2 MIM I N
IMAIMAGE DI DISP . :ON:ON
SESETCANCELCANCEL
:OK:OK
1
2 3 4 5
Use this function to control the digital zoom.
When zooming changes from optical to digital, the
position of the “■” indicator stops. Press the same
Zoom switch again to start the “■” indicator moving
again.
●
!
If the shot goes out of focus during zooming, hold the shutter
button down halfway to refocus the shot.
DIGITAL ZOOM
SESE T
-
UPUP
: L O W
DIGI
IGITALAL Z OOOOMONON
SESETCANCELCANCEL
: L O W
2
1 3 4 5
BEEPBEEP
SHUTTERSHUTTER
hOptical zoom focal length✽
Approx. 35 mm to 105 mm, max. zoom scale: 3×
hDigital zoom focal length ✽
■ FinePix A360
Approx. 105 mm to 378 mm,
max. zoom scale: approx. 3.6×
■FinePix A370
Approx. 105 mm to 425 mm,
max. zoom scale: approx. 4.1×
Optical
zoom
Digital
zoom
Zoom bar display
The position of the “ ”
indicator on the zoom bar
shows the zooming status.
The area to above of the
separator indicates digital
zooming, while the area to
below indicates optical zooming.
Using the digital zoom allows you to enlarge your
subject and shoot it. However, it will lower your
image quality. Set the digital zoom when requiring it.
The sleep mode does not operate in SET-UP or Playback mode, but the camera will turn off if it is
left unused for a time (2 or 5 minutes).

◆To restore power to the camera ◆

When the Power save function (2 or 5 minutes
setting) has shut the camera down:
Press the “POWER” button.
✽35 mm camera equivalents