17
Usingthe Camera
2
2
1Press the “POWER” button to turn the cameraon.2Set the Mode switch to “q”.hFocal rangeApprox. 60 cm (2.0 ft.) to infinity
!
Use Macro mode for subjects closer than 60 cm (2.0 ft.)
(P.27).
!
When “7”, “-”, “q
or “=” appears, see P.82.
Brace your elbows against your sides and hold thecamera with both hands. Position your right thumbso that it is handy for using the zoom.
!
Moving the camera while shooting gives a blurred picture
(camera shake). Use a tripod to prevent camera shake,
particularly for shots in the dark when the selected flash
mode is Suppressed flash.
!
There may be some uneven brightness at the lower edge of
the LCD monitor. This is normal and does not affect the
image.
3Hold the camera so that your fingers or the strap do
not cover the lens or flash. If the lens or flash isobscured, the brightness (exposure) of your shotmay be incorrect.
!
Check that the lens is clean. If it is dirty, clean the lens as
informed on P.78.
!
If the flash is used in dusty conditions or when it is snowing,
white dots may appear in the image due to flash reflecting off
the dust particles or snowflakes. Use Suppressed flash mode
to fix the problem.
4Press “[(a)” to zoom in. Press “](b)” to zoom
out. A zoom bar appears on the LCD monitor.hOptical zoom focal length(35 mm camera equivalent)Approx. 35 mm to 105 mmMax. zoom scale: 3×
!
See P.55 for information on procedures for using Digital
zoom.
1212N
Zoom bar
16
ERAS
AS
E OK?
FRAM E
FRAME
FRAM E
YES
YES
YES CAN C E L
CANCEL
CAN C E L
YES
YES
YES CA N C E L
CANCEL
CA N C E L
10 0
-
00 0 9
10
10
0
-
0009
009
Press this button to stop a
procedure midway through.
Up, down, left and right are indicated by black triangles in the Owner’s Manual. Up or down is
shown as “aor “b”, and left or right is shown as “dor “c”.
Using the MenusDISP/BACK button
1Displaying the menu.
Press the “MENU/OK” button.
4Confirming the setting.
Press the “MENU/OK” button.
2Selecting a menu option.
Press the left or right arrow on the dc
button.
3Selecting a setting.
Press the up or down arrow on the f
switch.
Instructions for the next step in the procedure
appear at the bottom of the LCD monitor. Press
the button indicated.
Press the “MENU/OK” button to erase the
displayed frame. To cancel erasing, press the
“DISP/BACK” button.
Displaying the on-screen help

BASIC OPERATION GUIDE

101
02

TAKING PICTURES (aAUTO MODE)

PHOTOGRAPHY MODEContinued