77
Software Installation
5
76
5.2 INSTALLATION ON A Mac OS 9.2
Pre-installation checklist
To run this software, you must have the hardware and software described below. Check your
system before you begin the installation.
Compatible Mac Power Macintosh G3✽1, PowerBook G3✽1,
Power Macintosh G4, iMac, iBook,
Power Macintosh G4 Cube or PowerBook G4
Operating System
RAM 64 MB minimum✽3, 256 MB or better recommended
(When using ImageMixer VCD2 for FinePix: 128 MB or better)
Hard disk space Amount required for installation: 400 MB minimum
Amount required for operation: 600 MB minimum
(When using ImageMixer VCD2 for FinePix: 2 GB or better)
Display 800 ×600 pixels or better, at least 32,000 colors
(When using ImageMixer VCD2 for FinePix: 1024 ×768 or better)
Internet connection✽4iTo use the FinePix Internet Service or mail attachment function
An Internet connection or e-mail transmission software is needed
iConnection speed: 56 k or better recommended
Mac OS 9.2.2✽2
✽1 Models with a USB port as a standard feature
✽2 This software does not run correctly in the Mac OS X Classic environment.
✽3 Turn virtual memory on if necessary.
✽4 Required to use the FinePix Internet Service. The software can still be installed even if you do not have an Internet
connection.
1Turn on your Macintosh and start up Mac OS 9.2.2.
●
!
Do not connect the camera to your Macintosh until the software installation is completed.
3
When the bundled CD-ROM is loaded into the CD-ROM drive, the [FinePix] volume appears.
Double-click the volume icon to open the volume window.
Double-click “Installer for MacOS9” to launch the Installer.
2
◆Notes ◆
iConnect the camera directly to the Macintosh using the USB cable (included). The software may not
operate correctly if you use an extension cable or connect the camera via a USB hub.
iPush the USB connector fully into the socket to ensure that it is securely connected. The software
may not operate correctly if the connection is faulty.
iAdditional USB interface board is not guaranteed.
iOn Macintosh PCs, allocate at least 400 MB of virtual memory when RAW FILE CONVERTER LE is
used. If other applications will be used at the same time, allocate the additional amount required for
those applications also.
2Click the [Save] button.
4The Installer setup screen appears. Click the
[Installing FinePixViewer] button.
●
!
For more information on what is installed, click the [Read Me
First] button and [Using FinePixViewer] button.
7Select the installation destination for FinePixViewer.
1Click the [Open] button to open the installation
destination folder.
5A confirmation message appears asking whether you want to continue with the installation.
Click the [OK] button.
6The User License Agreement for this software appears. Read the agreement carefully and
then, if you agree to the terms of the Agreement, click the [Agree] button. If you click the
[Disagree] button, the software is not installed.
8Install ImageMixer VCD2 for FinePix as directed by the on-screen instructions.
Continued