Filter
Adapter ring
Tele Conversion Lens
TL-FXE01
Adapter ring
Adapter ring
Wide Conversion Lens
WL-FXE01
9796

Overview of the conversion lens / adapter ring

Ring cover
Adapter ring release
button
Attaching the conversion lens
Hold down the adapter ring release button and
apply your finger to the projection to remove the
ring cover.
!
Keep the ring cover in a safe place after removing it.
1
Adapter ring
Set the indicator on the adapter ring to the position
of adapter ring release button. Attach the adapter
ring by screwing in the direction of the arrow until it
stops.
2
Mount the conversion lens or commercially
available filters on the adapter ring.
3

Adapter Ring AR-FXE01

Use the adapter ring when the conversion lens and commercially available filters are mounted on
the lens.
Compatible filters: 43 mm-diameter commercial available filters
Dimensions : ø46 mm (1.8 in.) ×L25 mm (1.0 in.)
Weight : Approx. 11 g (0.4 oz.)
!
Do not use more than one filter at a time.

Tele Conversion Lens TL-FXE01

This accessory increases the focal length of your lens by 1.94 times (equal to a 177 mm telephoto
lens) without changing its F-stop value. Use the adapter ring AR-FXE01 (sold separately) when the
teleconversion lens is mounted on the lens.
Magnification : ×1.94
Lens configuration : 3 lenses in 2 groups
Shooting range : Approx. 1.2 m to infinity
Dimensions : ø46 mm (1.8 in.) ×L51 mm (2.0 in.)
Weight : Approx. 64 g (2.3 oz.)
Accessories : Lens caps (front and rear), Lens pouch
!
The TL-FXE01 should only be used for telephoto shots where eclipsing does not occur. Eclipsing occurs at wide-angle
settings.
!
Use the LCD monitor to adjust the shot composition when attaching the teleconversion lens. The field visible through the
viewfinder does not match the field actually photographed.
!
The built-in flash cannot be used with the teleconversion lens.

Wide Conversion Lens WL-FXE01

This accessory converts the focal length of your lens by 0.76 times (equal to a 21.3 mm wide-angle
lens) without changing its F-stop value. Use the adapter ring AR-FXE01 (sold separately) when the
wide conversion lens is mounted on the lens.
Magnification : ×0.76
Lens configuration : 3 lenses in 3 groups
Shooting range : Approx. 0.6 m to infinity
Dimensions : ø64.5 mm (2.5 in.) ×L34 mm (1.3 in.)
Weight : Approx. 95 g (3.4 oz.)
Accessories : Lens caps (front and rear), Lens pouch
!
The WL-FXE01 should only be used for wide-angle shots where distortion does not occur. Using the lens at the telephoto
setting increases the amount of distortion.
!
Use the LCD monitor to adjust the shot composition when attaching the wide conversion lens. The field visible through the
viewfinder does not match the field actually photographed.
!
The wide conversion lens and built-in flash cannot be used together.
!
When using the wide conversion lens, there is a possibility of ghost imagesin shots that are taken facing towards the sun
or very strong light.
This risk can be decreased or eliminated by framing the shot so that bright light sources such as the sun are out of the
shot as much as possible.
What is ghost image?
Ghost image is an effect whereby strong light shining directly into the lens causes random reflections within the lens that
appear as circles or rings of light at different points to the original light source.