56 57
AdvancedFeatures
3
1Set the Mode switch to “r”.
2Press the “p” button.
!
In “r” Movie mode, do not set the “S” (sensitivity) setting.
!
In “r” Movie mode, do not set the “J” FinePix COLOR
setting.
201021Press “a” or “b” to change the setting.
2Press the “MENU/OK” button to confirm the
setting.
Quality settings in Movie mode
Press the shutter button down fully to start
recording.
!
The brightness and color of the LCD monitor shown during
movie recording may differ from those shown before
recording begins.
!
There is no need to hold down the shutter button.
4
Press the shutter button during recording,
Recording ends and the movie is stored on the xD-
Picture Card.
!
If recording is stopped immediately after it begins, 1 second
of movie is recorded onto the xD-Picture Card.
6
A counter appears in the top-right corner of the
LCD monitor during recording, showing the
remaining time.
!
If the brightness of the subject changes during movie
recording, the sound of lens operation may be recorded.
!
Some wind noise may be recorded in shots taken outdoors.
!
When the remaining time runs out, recording ends and the
movie is saved onto the xD-Picture Card.
5
10102
rRECORDING MOVIES
MOVIE MODE
Pressing the shutter button down fully fixes the
focus, however the exposure is adjusted for the
scene being shot.
yQUALITY SETTINGS IN MOVIE MODE
pPHOTO MODE MOVIE
Quality mode
for better quality
to record longer movies
60 sec.
180 sec.
$(320 × 240)
#(160 × 120)
Sample Uses maximum recording time
Available recording time
Recording times for xD-Picture Card
These figures are the available recording times using a new xD-Picture Card formatted on the camera. The actual
recording times will vary depending on the free space available on the xD-Picture Card.
Quality Setting
#(10 frames per second)
DPC-16 (16 MB)
DPC-32 (32 MB)
DPC-64 (64 MB)
DPC-128 (128 MB)
DPC-256 (256 MB)
288 sec.
9.7 min.
19.4 min.
39.0 min.
78.1 min.
156.3 min.DPC-512 (512 MB)
$(10 frames per second)
94 sec.
189 sec.
6.3 min.
12.7 min.
25.5 min.
51.0 min.
The quality setting is retained even when the
camera is off or the Mode switch setting is
changed.