75
ViewingImages
6
74
1Set the “USB/PLAY” switch on the cradle to the
“USB” position.
2Press the “POWER” button on the cradle to turn
the power on.
601
02
hWhen the camera and PC are exchanging data,
the self-timer lamp blinks and the viewfinder lamp
blinks alternately green and orange.
hDSC” appears on the LCD monitor.
hPower save and Auto power off are disabled
when the camera is set in a cradle.
!
Before replacing the xD-Picture Card, always disconnect the
camera from the PC. See P.77 for information on the
disconnection procedure.
!
Do not disconnect the USB cable when the camera is
communicating with the PC. See P.77 for information on the
disconnection procedure.

Camera Operation

Continued

USE AT DSC MODE

1Plug the USB cable (included) into the cradle
USB socket.
2Plug the AC power adapter connector into the
“DC IN 5V” socket on the cradle and then plug
the AC power adapter into the power outlet.
1
21Turn your PC on.
2Connect the PC to the cradle using the USB
cable (included).
USB socket
3Insert an xD-Picture Cardinto the camera.
01
02
41Slide the Power switch to the side to turn the
camera on.
2Select “” in “USB MODE” in the “SET-UP”
menu (P.59).
3Slide the Power switch to the side to turn the
camera off.
01
02

03

5Set the camera in the cradle.

6.2 CONNECTING TO A PC (USING THE CRADLE)