Notes on Using the Battery Charger

Use with the following power supply cord set:

Cord: UL Listed, Type SPT-2, No.18 AWG, rated 300V, 10A, minimum 6 ft (1.8m), maximum 10 ft (3m) long. One end terminates in a molded-on, parallel-blade, (non- polarized) attachment plug with a 7A, 125V (NEMA 1- 15P) configuration.

•The battery and battery charger themselves will become warm due to the power stored inside them. This is normal and does not indicate a fault. Wherever possible, use the battery charger in a well-ventilated location.

•There may be vibration noises from inside the battery charger during use. This is normal and does not indicate a fault.

•Do not use the battery charger to charge batteries other than rechargeable battery NP-40N/NP-40.

•The battery charger could cause interference if placed close to a radio during charging. In this event, move the radio and charger further apart.

•Do not leave the battery charger in the following types of locations:

•Extremely humidity or high temperatures, such as close to a heating appliance or in direct sunlight

•Places with strong vibration

•In very dusty places

•The battery charger accepts input voltages of 100-240 V AC at 50 or 60 Hz and can be used all over the world. However, the shape of the plug and socket-outlet depends on the country of use. Consult your travel agent for details.

ZBattery Charger BC-40 Specifications

Rated input

100-240 V AC, 50/60 Hz

Input capacity

100-240 V -0.1 A

Rated output

4.2 V DC, 630 mA

Applicable

Rechargeable Battery

batteries

NP-40N/NP-40

Charging time

Approx. 90 minutes

Dimensions

88.0 mm × 46.0 mm × 27.3 mm

 

(3.5 in. × 1.8 in. × 1.1 in.)

 

(L × W × D)

Mass (Weight)

Approx. 60 g (2.1 oz.)

 

(excluding batteries)

Operating

0°C to + 40°C

temperatures

(+ 32°F to + 104°F)

 

Continued Q

Appendices

117