Setting the Shooting Mode

N 25

ISO 100

SETTING SHUTTER SPEED 250 F5.6

APress oto select SETTING SHUTTER SPEED.

BPress por qto select the shutter speed.

CPress the shutter button to take pictures.

CAUTION

N 25

ISO 100

 

F2.8

SELECT

SET

1000

F2.8

Lit red

N 25

ISO 100

SELECT SET 50 F---

When the correct exposure cannot be obtained with selected shutter speed, the aperture setting appears in red. When this occurs, adjust the shutter speed again.

When the brightness of the subject is outside the camera’s brightness metering range, “F---” appears as the aperture setting. When this occurs, press the shutter button down halfway to measure the light level again.

CHECK

Shutter speed setting

2 sec. to 1/1000 sec. in 1/3 EV increments

MEMO

To change the macro or flash setting, press oto cancel the shutter speed setting.

For slow shutter speeds of 1/2 sec. or longer, recording takes longer because noise reduction processing is performed after you take the shot.

[PROCESSING...] appears on the LCD monitor during noise reduction.

48