60
SET-UP

■SET-UP menu options

IMAGE DISP.

1

2

3

ON/OFF ON
Specifies whether the preview images (the photographed
images) are displayed after taking a picture.
The image appears for a few moments and is then recorded.
POWER SAVE
2 MIN/5 MIN 2 MIN Reduces the camera’s power consumption and
subsequently turns the camera off when not being used.
FORMAT OK – Erases all files.
§BEEP LOW/HIGH/OFF LOW Sets the volume of the tone emitted when the camera
controls are used.
DATE/TIME SET – Corrects the date or time.
TIME
DIFFERENCE SET – Specifies the time difference settings.
FRAME NO. CONT./RENEW CONT. Specifies whether frame numbers are assigned
consecutively from previous numbers or begin again.
USB MODE /qWEB/®
This mode provides a simple way to read images
from an xD-Picture Cardand store images onto an
xD-Picture Card.
This function allows you to conduct videoconferencing
sessions between PCs connected to the Internet.
✽Windows SP1 only
If a printer that supports PictBridge is available,
images can be printed by connecting the camera
directly to the PictBridge-compatible printer without
using a PC.
qWEB
®
ENGLISH
Specifies the language used for screen display.
VIDEO SYSTEM
NTSC/PAL – Specifies whether video output is set to NTSC or PAL.
qRESET OK –
Resets all the camera settings (other than the DATE/TIME,
TIMEDIFFERENCE, LANG. and VIDEO SYSTEM) to the
factory default values set at shipment. A confirmation
message appears when you press “c”. To reset the camera
settings, press the “MENU/OK” button again.
DISCHARGE OK – Discharges rechargeable batteries.

Settings Display

Factory default

Explanation

–
61
61
–
13
62
63
73
74
76
–
–
–
87

Page