94
Specifications

Power Supply and Others

Power supply Use one of the following:

i4×AA-size alkaline batteries

i4×AA-size Ni-MH (Nickel-Metal Hydride) batteries (sold separately)

iAC Power Adapter AC-5VH/AC-5VHS (sold separately)

Guide to the number of

available frames for battery

operation

Conditions for use Temperature: 0°C to +40°C (+32°F to +104°F); 80% humidity or less (no

condensation)

Camera dimensions (W/H/D) 99.7 mm ×77.3 mm ×69.3 mm/3.9 in. ×3.0 in. ×2.7 in.

(not including accessories and attachments)

Camera mass(weight) Approx. 285 g/10.1 oz.

(not including accessories, batteries, xD-Picture Cardand Adapter Ring)

Weight for photography Approx. 410 g/14.5 oz.

(including batteries and xD-Picture Card)

Accessories See P.7

Optional Accessories See P.83

According to the Camera & Imaging Products Association (CIPA) standards:
When using alkaline batteries, use the batteries supplied with the camera. When using NiMH
batteries, use FUJIFILM-brand Fujifilm Rechageble Battery 2HR-3UF NiMH batteries.
The storage media should be xD-Picture Card. (Also state the capacity of the media used for
measurement.)
hNote: Because the number of available shots varies depending on the capacity of alkaline
batteries or the level of charge in NiMH batteries, the figures shown here for the
number of available shots using batteries are not guaranteed.
The number of available shots will also decline at low temperatures.
“CIPA DC-002-2003 ‘Standard Procedure for Measuring Digital Still Camera Battery
Consumption’ ” (extract)
Pictures shall be taken at a temperature of 23°C, with the LCD monitor turned on, the zoom
moved from full wide-angle to full telephoto (or vice-versa) and back again to its original
position every 30 seconds, the flash used at full power every second shot and the camera
turned off and then on again once every 10 shots.
Alkaline batteries Ni-MH batteries (2300mAH)
Using LCD monitor Approx. ••• frames
Battery Type
These specifications are subject to change without notice. FUJIFILM shall not be held liable for damages resulting
from errors in this Owner’s Manual.
The LCD monitor and viewfinder (EVF) on your digital camera are manufactured using advanced high-precision
technology. Even so, small bright points and anomalous colors (particularly around text) may appear on the monitor on
the finder. These are normal display characteristics and do not indicate a fault with the monitor on the finder. This
phenomenon will not appear on the recorded image.
The operation error may be caused in a digital camera by the strong radio interference (i. e. electric fields, static
electricity, line noise, etc.).
Due to the nature of the lens, the edges of images may appear distorted. This is normal.

Standard number of available frames/recording time per xD-Picture Card

The number of available frames, recording time or file size varies slightly depending on the subjects photographed. Note also
that the difference between standard number of frames and the actual number of frames is greater for
xD-Picture Cards with higher capacities.
Quality Setting
DPC-16 (16 MB)
DPC-32 (32 MB)
DPC-64 (64 MB)
DPC-128 (128 MB)
DPC-256 (256 MB)
Image Data Size
Number of recorded pixels
4F4N
8
16
33
66
134
1.9 MB 960 KB
2272×1704
2
25
50
101
204
409
620 KB
1600 ×1200
1
33
68
137
275
550
460 KB
1280 ×960
Movie $
Approx. 98 sec.
Approx. 199 sec.
Approx. 6.6 min.
Approx. 13.3 min.
Approx. 26.7 min.
320 ×240
Movie #
Approx. 5.6 min.
Approx. 11.3 min.
Approx. 22.7 min.
Approx. 45.5 min.
Approx. 91.2 min.
DPC-512 (512 MB)
268
16
32
66
132
266
532 818 1101
`
122
247
497
997
1997
125 KB
640 ×480
3993 Approx. 53.5 min.
Approx. 182.5 min.
160 ×120