117
Software Installation
Connecting to a PC
By connecting the camera to a PC, your system can be
expanded to fill a wide range of uses. Using
“FinePixViewer” performs images saving, browsing and
file management etc.
MEMO
If the power cuts out during data transmission, the data
will not be transmitted correctly. Always use the AC power
adapter when connecting the camera to a PC.
CAUTION
• Do not format the xD-Picture Card in the camera on
the PC.
• Use the xD-Picture Card with images taken by a
FUJIFILM Digital camera.
• When connecting to a PC, if the xD-Picture Card
contains large image or movie files, connection may
take time or images may not be stored. In these cases,
use the Image Memory Card Reader (sold separately),
etc. Continued Q
AInsert the xD-Picture Card with images into the
camera (➝p.19).
CD-ROM
(Software for FinePix CX)
Refer to Software
Installation (➝p.111, 114)
the first time you connect
the camera to your PC.
Install the software first. Do
not connect the camera to
the PC before installing all
the software.
DClose the lens cover and set the camera in the cradle.
EPress POWER on the cradle to turn the camera on in
Playback mode.
USB cable (mini-B)
AC-5VC
BConnect the cradle to
your PC using the
USB cable (mini-B).
CPlug the AC power
adapter connector
into the DC IN 5V
socket on the cradle
and then plug the
AC power adapter
into the power outlet.