52
d Setting the FlashFlash photography is useful for taking pictures at night or
indoor dark locations. Choose from 6 flash modes
according to the type of shot. See p.53 for information on
the available Photography modes.
MEMO
When pressing the shutter button down halfway, b
appears on the LCD monitor before the flash fires.
Use this mode for ordinary photography.
The flash fires as required by the shooting conditions.
MEMO Red-eye effect
When using the flash to take a picture of people in low-
light conditions, their eyes sometimes appear red in the
picture. This is caused by the light of the flash reflecting
off the inside of the eye.
Use this mode in backlit scenes, or to get the correct
colors when taking a picture under bright lighting.
In this mode, the flash fires in bright as well as dark
conditions.
This mode is suitable for situations where the flash cannot
be used.
Place the camera on a stable surface to prevent camera
shake when shooting in Suppressed flash mode in the
dark condition.
Any time, flash does not fire.
This mode allows you to take pictures of people at night
that clearly show both your subjects and the night time
backdrop. To prevent camera shake, always place the
camera on a stable surface.
Using n synchronizes Red-eye reduction mode.
Using / selects slow shutter speeds of up to 4 seconds.
CAUTION
In bright scenes, overexposure may occur.
AUTO Auto flash (not displayed)
b RED EYE REDUCTION
This mode is suitable for shooting portraits
in low-light conditions.
Use this mode to minimize red-eye (eyes
appear in red in the finished photo).
DISP/BACK
W
T
MENU
/OK
The flash setting changes
each time you press d
(q).