The Setup Menu

NISO AUTO CONTROL

Choose whether the camera automatically adjusts sensitivity if optimal exposure can not be achieved at current settings. Selecting NISO AUTO CONTROL displays the settings listed in the table below; press the command dial up or down to highlight a setting and press the dial right to display options for the highlighted item, then highlight the desired option and press MENU/OK.

When ISO AUTO CONTROL is on, the upper limit for sensitivity is fixed at the value selected for MAX. SENSITIVITY. The camera will not exceed this limit even if underexposure would result.

Option

Description

Default

ISO AUTO CONTROL

If ON is selected, the camera will automatically adjust sensitivity if optimal exposure can not be

ON

 

achieved at current settings.

 

MAX. SENSITIVITY

Choose the upper limit for auto sensitivity from ISO 400, 800, 1600, and 3200 (the lower limit is fixed

800

 

at ISO 200).

 

MIN. SHUTTER SPEED

When the shutter speed dial is rotated to A and ISO AUTO CONTROL is ON, the camera will adjust

1/60 SEC

 

sensitivity only as required to prevent shutter speed from being slower than this value.

 

RIn shutter-priority AE and manual exposure modes, the camera will automatically adjust sensitivity if optimal exposure can not be achieved at the shutter speed selected by the user.

RSensitivity is automatically adjusted for optimal flash output when a flash is used.

RShutter speed, aperture, and the current sensitivity are displayed when the shutter button is pressed halfway.

BRED EYE REMOVAL

(defaults to OFF)

Choose ON to remove red-eye effects caused by the flash.

 

RRed-eye reduction is performed only when a face is detected. R Red-eye removal is not available with RAW images.

84