Sensitivity“Sensitivity” refers to the camera’s sensitivity to light. Choose from values between L (100) (ISO 100) and H (12800) (ISO 12800). Higher values can be used to reduce blur when lighting is poor, while lower values allow slower shutter speeds or wider apertures in bright light; note, however, that mottling may appear in pictures taken at high sensitivities, particularly at H (12800), while choosing L (100) reduces dynamic range. Values of from ISO 200 to ISO 6400 are recommended in most situations.
1Press MENU/OK in shooting mode to display the shooting menu. Press the command dial up or down to highlight NISO and press MENU/ OK.
R At default settings, ISO options can also be displayed by pressing the Fn button.
2 Press the command dial up or down to highlight the desired option and press MENU/OK to select.
|
|
|
| P | SHOOTING MENU |
| |||
|
|
|
|
|
|
|
|
|
|
|
|
|
| OFF | |||||
|
|
|
| ISO | 200 | ||||
|
|
|
| IMAGE SIZE | 3:2 | ||||
|
|
|
| IMAGE QUALITY | F | ||||
|
|
| SET | DYNAMIC RANGE |
| ||||
|
|
| FILM SIMULATION |
| |||||
|
|
|
| EXIT |
| ||||
|
|
|
|
|
|
|
|
| |
| P | SHOOTING |
|
|
| ||||
|
| OFF | 500 |
|
|
|
|
| |
|
| ISO | 400 |
|
|
|
|
| |
|
| 320 |
|
|
|
|
| ||
|
| 3 | 250 |
|
|
|
|
| |
|
| F |
| 200 |
|
|
|
|
|
SET |
|
|
| L (100) |
|
|
| ||
|
|
|
|
|
|
|
|
|
|
Photography on More
P 2000 | F5.6 | 200 |
RSensitivity is not reset when the camera is turned off.
R Sensitivities of L (100) and H (12800) are respectively reset to ISO 200 and 6400 when RAW, FINE+RAW, or NORMAL+RAW is selected for image quality (P56, 70). For more information on the settings available with L (100) and H (12800), see page 120.
RIf ON is selected for NISO AUTO CONTROL in the setup menu (P84), the camera will automatically adjust sensitivity if optimal exposure can not be achieved at current settings. The currently selected value is shown until the shutter button is pressed halfway, when the camera shows the adjusted value.
51