The Setup Menu

vADD NEW STAMP

Copy stamp files for QSTAMP mode from a memory card.

Stamp Files

Stamp fi les can be found in the “FF_STAMP” folder on the supplied FinePixViewer CD. Copying these fi les to the camera is a two stage process: fi rst, use a computer equipped with a card reader or memory card slot to copy the fi les from the CD to a memory card, then insert the memory card in the camera and copy the fi les to the camera using vADD NEW STAMP. Stamp fi les can not be copied directly from the computer to the camera.

Caution

If the installer starts when the FinePixViewer CD is inserted in a CD-ROM drive, click Cancel to exit.

1Insert the memory card containing the stamp fi les in the camera and select vADD NEW STAMP in the setup menu.

2 Press the selector left or right to display the desired stamp.

SELECT STAMP

0 4

SET/RESET

OK CANCEL

3 Press the selector up to select or deselect the current stamp. Selected stamps are indicated by a check mark.

SELECT STAMP

1 4

SET/RESET

OK CANCEL

Menus

89